Pelco C2410M-J manual Specifications, General, Electrical

Page 9
Specifications

Specifications

GENERAL

Operating Temperature

-50° to 122°F (-46° to 50°C)

 

De-ices to 25°F (-4°C)

Pan/Tilt

 

Adjustment

Manual; 360° pan, 180° tilt

Construction

Aluminum with steel camera mounting bracket and polycarbonate dome

Finish

White polyester powder coat trim ring with charcoal gray back box

Dimensions

Refer to dimension drawing below

Environment

Low temperature, indoor/outdoor, suitable for use in environmental air

 

handling spaces

Weight

1.70 lb (0.77 kg)

ELECTRICAL

Input Voltage

12

VDC or 24 VAC, ±10%

Power Consumption

13

W or less

Video Connector

BNC

(Design and product specifications subject to change without notice.)

5.48 (13.92)

3.50 (8.89)

1.75

(4.45)

2.42

(6.15)

NOTE: VALUES IN PARENTHESES ARE CENTIMETERS;

ALL OTHERS ARE INCHES.

The materials used in the manufacture of this document and its components are compliant to the requirements of Directive 2002/95/EC.

This equipment contains electrical or electronic components that must be recycled properly to comply with Directive 2002/96/EC of the European Union regarding the disposal of waste electrical and electronic equipment (WEEE). Contact your local dealer for procedures for recycling this equipment.

C2410M-J (2/08)

9

Image 9
Contents C2410M-J2/08 150 Series Camclosure Integrated Camera SystemIn-CeilingMount I N S T A L L A T I O NContents Important Safety Instructions Radio and Television Interference Regulatory NoticesINSTALL BACK BOX InstallationDescription MOUNTING DIRECTLY TO A WALL OR CEILINGMOUNTING TO CEILING TILE INSTALL CAMERATurn on power to the camera and monitor INSTALL DOME AND TRIM RINGNOTE The screws are installed at an angle Proper camera orientationVERTICAL PHASE 24 VAC OPERATION ONLY AdjustmentsSpecifications GENERALELECTRICAL PRODUCT WARRANTY AND RETURN INFORMATION WARRANTYRETURNS Manual # REVISION HISTORYDate CommentsClovis, California 93612 USA USA & Canada Worldwide Headquarters 3500 Pelco WayTel 800/289-9100 Fax 800/289-9150 International Tel 1-559/292-1981 Fax 1-559/348-1120