Description, Installation, Install Back Box

Description

The 150 Series Camclosure® integrated camera system is an in-ceiling dome incorporating a camera and lens package into a small, discreet, high-security enclosure designed for areas subject to heavy vandalism. The system is perfect for a variety of indoor and outdoor applications and its versatile design allows for multiple mounting options.

The ICS150 Series Camclosure can be installed directly to a wall, ceiling, 4S electrical box (using the optional ICS150 adapter plate), or a ceiling tile.

Installation

INSTALL BACK BOX

MOUNTING DIRECTLY TO A WALL OR CEILING

1.Cut a hole 3.5 inches (9 cm) in diameter in the ceiling or wall using the adapter plate as a template.

2.Connect the video cable.

3.Connect the power wires.

•For 12 VDC, connect the 24 VAC/12 VDC (red) and GND (black) wires to input power. The blue wire is not used.

WALL OR CEILING

MOUNTING HARDWARE

(NOT SUPPLIED)

BACK BOX

MOUNTING DIRECTLY TO

WALL OR CEILING

•For 24 VAC, connect the 24 VAC/12 VDC (red) and 24 VAC (blue) wires to input power. The black wire is not used.

4.Attach the back box to the wall or ceiling.

MOUNTING TO 4S DEEP ELECTRICAL BOX

1.Attach the adapter plate to the 4S box with the two 8-32 x 0.750-inch screws. (supplied)

2.Connect the video cable.

3.Connect the power wires.

•For 12 VDC, connect the 24 VAC/ 12 VDC (red) and GND (black) wires to input power. The blue wire is not used.

4S DEEP ELECTRICAL BOX

WALL OR

CEILING

8.32 X .750 SCREW

(SUPPLIED)

ADAPTER PLATE

BACK BOX

8.32 X .375 SCREW (SUPPLIED)

MOUNTING TO 4S DEEP ELECTRICAL BOX

•For 24 VAC, connect the 24 VAC/12 VDC (red) and 24 VAC (blue) wires to input power. The black wire is not used.

4.Attach the back box to the adapter plate with the four 8-32 x 0.375-inch screws (supplied).

C2410M-J (2/08)