• Turn off all components before making any connections.
• Peripheral equipment and cables sold separately unless otherwise indicated.
Auto speaker setup • To connect equipment, refer to the appropriate operating instructions.
Auto speaker setup allows you to achieve a satisfactory listening environment easily with the use of the supplied calibration microphone as a detector of sound signals. The unit will first perform automatic speaker detection, then checks and adjusts the following settings.
DETECTION | • Checks which speakers you have connected. |
DISTANCE | • | Checks the distance of each speaker from the listening position and adjusts the | |
| timing of each channel automatically. | ||
|
|
| |
|
|
|
|
FREQUENCY | • | Makes any further corrections to the frequency response. | |
|
|
|
|
LEVEL | • | Checks and adjusts each speaker level automatically. | |
Auto speaker setup STEP 4
Loud test tones are output from the speakers during setup, so keep children out of the room.
Before setup
Conduct the auto speaker setup in a quiet environment. A noisy background will give unsatisfactory results.
Process for auto speaker setup
Turn on the unit. | Press | . |
• The standby indicator goes off when you turn on the unit.
| Note |
Connect the calibration | The calibration microphone is sensitive to |
microphone to the | heat. Keep it away from direct sunlight and |
[SETUP MIC] jack on | do not place it on top of the unit. |
the front panel. |
|
| Calibration microphone |
| (included) |
Placing of calibration | • Place on a flat surface at the seating area. |
microphone. | • Set calibration microphone position at |
| your ear height. |
RQTX0175
11