•Turn off all components before making any connections.
•Peripheral equipment and cables sold separately unless otherwise indicated.
•To connect equipment, refer to the appropriate operating instructions.
Other speaker setup options |
|
|
|
|
|
|
|
|
|
|
|
■ Fitting optional speaker stands | Example: Surround speaker |
| Plate thickness plus | ||||||||
(For front, center and surround speakers) |
|
|
|
|
|
|
|
|
|
| 7.0 mm (9/32") to |
| Metal screw |
| 10 mm (13/32") | ||||||||
Ensure the stands meet these conditions before purchasing them. |
|
| |||||||||
| hole |
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| ||
Note the diameter and length of the screws and the distance between | For attaching |
|
| ||||||||
screws as shown in the diagram. |
| to speaker |
| Speaker stand | |||||||
• The stands must be able to support over 10 kg (22 lb.). |
| stands. |
| ||||||||
• The stands must be stable even if the speakers are in a high position. |
|
|
|
|
|
|
|
|
| (not included) | |
5.0 mm (3/16"), pitch 0.8 mm (1/32")
■Attaching to a wall
You can attach the surround, center and front speakers to a wall.
•The wall or pillar on which the speakers are to be attached should be capable of supporting 10 kg (22 lb.) per screw. Consult a qualified building contractor when attaching the speakers to a wall. Improper attachment may result in damage to the wall and speakers.
Drive the screw (not included) into the wall | Fit the speaker securely onto the screw(s) with the hole(s) |
| Center speaker |
At least 30 mm (13/16") |
|
| Front speakers |
Speaker setup STEP 1
Ø4.0 mm (5/32") | Ø7.0 mm (9/32") | 190 mm |
| to 9.4 mm (11/32") | (715/32") |
Wall or pillar | 4.0 mm (5/32") |
|
| to 6.0 mm (1/4") | Surround speaker |
|
|
Caution
•Use the speakers only with the recommended system. Failure to do so can damage the amplifier and speakers, and can cause fire. Consult a qualified service person if damage occurs or if a sudden change in performance is apparent.
•Do not attempt to attach these speakers to walls using methods other than those described in this manual.
If irregular coloring occurs on your television
The supplied speakers are designed to be used close to a television, but the picture may be affected with some televisions and setup combinations.
If this occurs, turn the television off for about 30 minutes.
The television's demagnetizing function should correct the problem. If it persists, move the speakers further away from the television.
Notes on front speakers
These speakers do not have magnetic shielding. Do not place them near televisions, personal computers or other devices easily influenced by magnetism.
Wireless system connection |
|
|
|
|
Set your sound free with Panasonic’s wireless | PUSH |
| PUSH Digital transmitter cover | |
receiver and speaker systems |
|
|
|
|
Attach the | PUSH | DIGITAL | PUSH |
|
You can also connect your portable audio equipment to the wireless Push! |
| TRANSMITTER |
| Push! |
|
|
| ||
system.
For details, refer to the operating instructions for
Note
Remove the digital transmitter cover before installing any optional | Rear panel of the main unit | |
Panasonic wireless accessory. | ||
You can use the blunt end of a writing instrument | ||
• Replace the cover when the digital transmitter is not in use. | ||
to push here until the cover pops out. | ||
|
RQTX0175
7