Panasonic SCHT56 Settings, Off, Ctrl Drcomp OFF Standard MAX Attenuator OFF TV Delay

Settings

Display

Switch on.

Settings

HDMI settings • To reduce standby power consumption.			TM	”
	• Choice for turning off the VIERA Link “HDAVI Control
	(➡ page 8).
Standby selection		VIERA Link “HDAVI Control”
OFF: Standby power consumption reduced		OFF: VIERA Link “HDAVI Control”
	(approximately 0.3 W).	is OFF
•	Signals from DVD equipment cannot pass	ON: VIERA Link “HDAVI Control”
		is ON (factory setting)
	through HDMI connection to the television
	when the unit is in standby (➡ page 8).
•	VIERA Link “HDAVI Control” (➡ page 8)
	does not work when the unit is in standby.

ON: Normal standby power consumption (factory setting)

DRCOMP	(Dynamic range compression)
	• Change this setting to listen to software recorded with Dolby
	Digital at low volume (such as late at night) and maintain audio
	clarity. It reduces the peak level in loud scenes without affecting
	the sound field.

OFF: The software is played with the original dynamic range (factory setting).

STANDARD: The level recommended by the producer of the software for household viewing.

MAX: The maximum allowable compression (recommended for night viewing).

Attenuator		(A/D Attenuator)
		• Turn the A/D attenuator on if “OVERFLOW” lights frequently
		when using 2-channel analog input. The factory setting is OFF.
TV delay	• Delay audio if there appears to be a difference in timing between
		audio and pictures. The factory setting is ON.

2a	2b	3
HDMI	STNBY

	OFF
CTRL	ON

DRCOMP	OFF
	STANDARD
	MAX

ATTENUATOR OFF

ON

TV DELAY	OFF
	ON

Adjusting speaker output level

VOL	C (center), RS (surround right) and LS (surround left) can be adjusted between -6 dB and
	+6 dB, with 0 dB being the level of the front speakers. Adjust center and surround output to
	the same apparent level of the front speakers.
	For SUBW (subwoofer), you can select “SUBW OFF” so there is no output, “SUBW MIN”
	for minimum output, a level between 1 and 19, or “SUBW MAX” for maximum output. Adjust
	subwoofer output so it is balanced with the front speakers.

RQTX0175

14

Output the signal.		Adjust the main	Select the speaker	Adjust the level.	Stop the test
		volume.	channel.		signal.
		VOL
Press and hold.				C +4dB
TEST	L				Press and hold.
L C R RS	LS SUBW

Repeat for each speaker channel