American Standard 4210 Make Water Supply Connections, Test Installed Faucet

Page 2

2 MAKE WATER SUPPLY CONNECTIONS

Turn off hot and cold water supplies before beginning.

Connect FLEXIBLE SUPPLIES (1, 2) directly to wall supplies. Connection on fitting supplies are 3/8" compression. Connect left supply to Hot (Marked with a Red Tag)

and right supply to Cold wall supply. Use

2

adjustable wrench to tighten connections.

RED TAG

Do not over tighten.

1

 

Faucet supplies are 21" long from faucet base.

RED

Note: If additional supply length is

COLD

 

required, installer must purchase

HOT

additional parts separately.

 

Important: If SUPPLY HOSES (1, 2) are too long, loop as illustrated to avoid kinking.

3 CONNECT SPRAY HOSE

Slide COUPLING NUT (1) onto HOSE (2)

3

1

 

Place WASHER (3) into COUPLING NUT (1)

 

6

 

5

on HOSE (2). Thread COUPLING NUT (1) onto

 

 

HAND SPRAY (4) and tighten.

4

 

(May already be assembled).

 

Feed small end of HOSE (2) through BODY (5) so

 

2

HAND SPRAY (4) rests inside SPRAY HOLDER (6).

 

Thread HOSE END (7) onto OUTLET HOSE ADAPTER (8) and tighten.

With HAND SPRAY (4) seated in SPRAY HOLDER (6), install WEIGHTS (9) onto HOSE (2) using two SCREWS (10). Locate the WEIGHTS (9) two feet (2') from the underside of the sink deck. Tighten SCREWS (10) firmly.

 

 

24"

 

 

 

 

 

8

 

4 TEST INSTALLED FAUCET

With HANDLE (1) down in "off"

 

 

 

position.

 

 

7

Move HANDLE (1) down into "off"

Pull HAND SPRAY (2) from FAUCET (5)

 

 

position.

and disconnect HAND SPRAY (2). Be

9

10

 

Turn on water supplies.

careful not to lose WASHER (7). Pull

2

 

Check connections for leaks. (See

HOSE (3) (HOSE should pull

 

 

 

approximately 2 feet) and direct open

 

 

 

Section 5)

 

 

 

HOSE END (4) into sink.

 

 

 

6

 

 

 

1

 

 

 

 

 

 

 

2

Operate handle up and down, in COLD and HOT positions, to

7

flush water lines thoroughly.

 

 

3

Place WASHER (7) into HOSE END (4) and connect

 

5

HAND SPRAY (2) to HOSE END (4). Place HAND SPRAY (2)

 

back into faucet.

 

 

 

 

Check HAND SPRAY (2) operation:

 

 

With faucet on push front of BUTTON (6) for a broad

 

 

cleansing spray.

 

 

 

4

M 9 6 8 4 6 1 B

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Installation Instructions Install Faucet with or Without Deck EscutcheonTest Installed Faucet Make Water Supply ConnectionsCheck Connections for Leaks ServiceHOT Limit Safety Stop Adjustment Do not4210

4210 specifications

The American Standard 4210 is a standout model in the realm of modern bathroom fixtures, designed for both comfort and functionality. Renowned for its innovative features, this toilet represents a perfect blend of advanced technology, ergonomic design, and sustainability, making it a top choice for homeowners looking to upgrade their bathrooms.

One of the most notable features of the American Standard 4210 is its efficient flushing system. This model utilizes the company's patented EverClean surface that keeps the toilet cleaner for longer by inhibiting the growth of stains and odors caused by bacteria, mold, and mildew. Additionally, the 4210 is equipped with a powerful siphon jet that provides a strong and effective flush while using a minimal amount of water. With its 1.28 gallons per flush (GPF) rating, it adheres to water conservation standards without sacrificing performance, helping homeowners reduce their water bill while benefiting the environment.

In terms of design, the American Standard 4210 boasts a sleek and modern appearance that can enhance the aesthetic of any bathroom. The elongated bowl design provides added comfort compared to traditional round bowls, making it more user-friendly for all ages. Furthermore, the height of the toilet is comfortable, catering not only to adults but also to individuals with mobility challenges, thereby offering inclusivity in its user experience.

Installation of the American Standard 4210 is straightforward, thanks to its standard footprint that aligns with existing plumbing in most bathrooms. Homeowners appreciate the user-friendly installation process, ensuring that upgrading to this model does not require extensive remodeling.

The tank of the 4210 is designed for optimal performance, featuring a quiet fill valve that minimizes noise during refills, ensuring a peaceful bathroom atmosphere. This innovation reflects American Standard's commitment to enhancing the overall user experience, making bathrooms more enjoyable and less intrusive.

Overall, the American Standard 4210 stands out for its combination of efficiency, comfort, and aesthetic appeal. With its advanced flushing technology, ease of installation, and thoughtful design elements, this toilet is an excellent investment for households that prioritize quality and sustainability in their bathroom fixtures.
Top Page Image Contents