American Standard 2580 installation instructions HotCold, With Handles 1 in OFF

Page 7

7 WATER SUPPLY CONNECTIONS

NOTE: FLEXIBLE SUPPLIES ARE NOT INCLUDED AND HAVE TO BE

PURCHASED SEPARATELY.

Connect water supplies to FAUCET (1) with 1/2" IPS FLEXIBLE SUPPLIES (2) or 3/8" O.D. BULL-NOSE RISERS (3). Use adjustable wrench to tighten connections.

Do not over tighten. Be careful not to kink copper supply when bending. Use tubing cutter to cut to proper length.

1

2

COUPLING NUT

8 FINISH DRAIN INSTALLATION

Position BIDET fixture and secure to floor.

Insert lift rod into lift rod guide.

Position EXTENSION ROD (1) onto POP-UP ROD (2) and tighten THUMBSCREW (3).

Remove one end of CLIP (4) from PIVOT ROD (7) by squeezing ends together while sliding.

Insert PIVOT ROD (7) into second or third hole in EXTENSION ROD (1) and reassemble CLIP (4). (EXTENSION ROD (1) may need to be bent.)

Adjust STOPPER height by repositioning EXTENSION ROD (1) and tightening THUMBSCREW (3).

Using metal TAILPIECE (5), make connection to the TRAP (6).

2

1

3

HotCold

FERRULE

3

1

5

6

7

4

9 TEST INSTALLED FITTING

1

With HANDLES (1) in OFF

 

position, turn on WATER SUPPLIES (2) and check all connections for leaks.

Operate both handles to flush water lines thoroughly. Turn diverter to rim wash and bidet spray.

Operate Lift Rod (3) and fill Bidet with water. Check that DRAIN STOPPER (4) makes a good seal and retains water in Bidet. Adjust stopper height by repositioning Lift Rod (3) and tightening Thumbscrew (5).

Release DRAIN STOPPER (4) and check all drain connections for leaks. Tighten if necessary.

25

3

10 SERVICE

To change direction of handle

rotation, proceed

 

as follows:

2

 

Turn valve to OFF position.

 

 

 

 

 

Remove HANDLE and

 

 

 

 

 

 

ADAPTER if present.

 

 

Remove SPRING CLIP (1).

 

 

 

 

 

 

Lift STOP WASHER (2),

 

 

 

 

 

 

turn 90° and replace.

 

 

Replace SPRING CLIP (1).

 

 

 

 

 

 

Replace HANDLE ASSEMBLY.

 

 

SPRAY (3) may accumulate dirt causing distorted and reduced water flow. Unscrew and remove SPRAY (3) and rinse clean.

Replace SPRAY (3) and operate handles several times from OFF to ON position. Do not force, handles turn only 90˚.

90°

1

3

4

11 CARE INSTRUCTIONS:

2

DO: SIMPLY RINSE THE PRODUCT CLEAN WITH CLEAR WATER. DRY WITH A SOFT COTTON FLANNEL CLOTH.

DO NOT: DO NOT CLEAN THE PRODUCT WITH SOAPS, ACID, POLISH, ABRASIVES, HARSH CLEANERS, OR A CLOTH WITH A COARSE SURFACE

M968293

Page 6 Page 8
Image 7
Page 6 Page 8
Contents 2580 Drain InstallationMounting Bidet Faucet TEE and Hose Connection Spray InstallationLift ROD Guide Installation Install HandlesWater Supply Connections Finish Drain InstallationTest Installed Fitting Service2581 Bidet Ledge 2581Hot Front TEE and Hose Connection Spray InstallationWith Handles 1 in OFF HotColdTransfer Valve

2580 specifications

The American Standard 2580 is a state-of-the-art toilet designed for efficiency and comfort, providing homeowners with a reliable and modern solution for their bathroom needs. With its sleek design and innovative features, the 2580 is engineered to offer superior performance while blending seamlessly into various bathroom aesthetics.

One of the standout features of the American Standard 2580 is its efficient water usage. The toilet utilizes advanced flushing technology that effectively clears waste with a minimal water volume, adhering to water conservation standards. By using just 1.28 gallons per flush, it helps reduce water consumption without compromising on flushing power. This efficiency is crucial for eco-conscious consumers looking to minimize their environmental impact.

In addition to its water-saving capabilities, the 2580 boasts a powerful siphon jet flushing system. This system effectively propels waste through the trapway, ensuring a clean and complete flush every time. The elongated bowl design enhances comfort and provides additional space, making it a popular choice for families and individuals alike. The higher seat height also caters to those seeking a more accessible toilet option, particularly beneficial for elderly users.

Durability is another hallmark characteristic of the American Standard 2580. Constructed from high-quality materials, this toilet is built to withstand regular use while maintaining its stylish appearance. The ceramic glaze finish is not only visually appealing but also easy to clean, helping to maintain hygiene in the bathroom.

Installation and maintenance of the 2580 are straightforward. The toilet comes equipped with a sturdy, durable tank that can be easily mounted to the bowl, ensuring a stable and secure fit. Additionally, American Standard provides a user-friendly flush mechanism that simplifies troubleshooting and repairs.

The American Standard 2580 also incorporates innovative technologies, such as EverClean surface treatment. This feature helps prevent the growth of stain and odor-causing bacteria, mold, and mildew, further enhancing the toilet's cleanliness and longevity.

Behind its blend of elegance and functionality, the American Standard 2580 stands out as a reliable choice for any modern bathroom. With its commitment to water efficiency, user comfort, and durable construction, this toilet exemplifies the brand's dedication to innovation and quality in bathroom fixtures. Whether renovating a home or replacing an outdated model, the 2580 presents a practical solution that meets today’s standards for efficiency and style.
Top Page Image Contents