Rinnai IB35ETRN, IB35ETRLC installation manual Maintenance Instructions

Page 19

MAINTENANCE INSTRUCTIONS

IMPORTANT MAINTENANCE INSTRUCTIONS

ANNUAL INSPECTION

The unit should be inspected at least once a year by a qualified service technician including inspection of the flue system.

The appliance area must be kept clear and free from combustible materials, gasoline and other flammable vapors and liquids.

CLEANING INSTRUCTIONS.

Before cleaning, make sure the electrical power and gas are turned off and that the unit has cooled down.

WARNING:Do not clean the glass or unit when hot.

Do not remove any internal wiring covers.

Do not use abrasive cleaners.

Do not use solvent based cleaners.

OUTER CASE

The outer case of the fire place should be cleaned with a soft, damp cloth.

Do not use aerosol polishes to clean the casing while the fire is in operation. Do not damage or distort any part of the heater.

Do not use wet cloth or spray cleaners on burners.

VENT MAINTENANCE

The flue should be inspected annually for blockages and signs of damage.

VISUAL INSPECTION OF FLAME

Check that the pilot and burner flames are operating normally.

If the flames appear either very short or very long and streaky or are producing smoke or soot deposits then there may be a problem with the heater or the gas supply.

A heater should not be used if you suspect there may be a problem, and a service agent must be called to investigate the cause of the problem.

The main burners are designed to produce some yellow flame but should not produce smoke or excessive soot.

Normal

Abnormal

Normal

Abnormal

NOTE:

The flames may take up to 15 minutes to settle from ignition when heater is cold

19

Image 19
Contents What to do if YOU Smell GAS IB35ETRN IB35ETRLCWhat is COVERED? Limited Warranty Rinnai Fireplace HeaterContacts Inbuilt Fire ETR Electronic Timer Remote Table of ContentsDimensions SpecificationsIncluded in the carton Important Points / Usage and Installation MustsDiagram shows Minimum Clearances from Technical Specifications Operating Instructions For Your Safety Read Before OperatingTo Turn OFF GAS to Appliance Operation Control Panel LayoutFlame Setting the ClockTimers / Preheat Programming the on / OFF TimersRemote Control Operating the TimersOverride To Replace Remote Control Battery Front LocationFireplace dimensions Purge Supply of AIR and Debris VentingGAS Connection RUN GAS SupplyElectrical Connection Refer to the diagram oppositeLOG Installation Testing and Commissioning Maintenance Instructions Burners Electric Motor MaintenancePCB Layout Wiring DiagramSymptom Cause Solution Wiring DIAGRAM-LADDER Trouble ShootingError Code Message Error CodesExploded Diagrams Page Glass RET Bottom Assy Painted Parts ListFront Pilot Shield USA Painted Installation Notes Installation Notes Installation Notes Installer Details Installation / Commissioning ChecklistNo YES Part Number 7919B

IB35ETRN, IB35ETRLC specifications

The Rinnai IB35ETRN and IB35ETRLC are advanced, energy-efficient heating solutions designed for residential and light commercial applications. These models belong to Rinnai's innovative range of condensing boilers, delivering exceptional performance while maximizing fuel efficiency.

One of the primary features of the Rinnai IB35ETRN and IB35ETRLC is their compact design. Both models are engineered to fit seamlessly into a variety of spaces, making them ideal for homes where space is at a premium. Their sleek, modern aesthetic complements contemporary décor, providing a discreet heating solution that does not compromise on performance.

The IB35ETRN and IB35ETRLC utilize cutting-edge condensing technology, which captures and reuses exhaust gases to enhance efficiency. This feature allows the boilers to achieve an impressive annual fuel utilization efficiency (AFUE) rating, making them not only environmentally friendly but also cost-effective in terms of energy consumption. Homeowners can appreciate reduced utility bills while maintaining comfortable indoor temperatures.

Another significant characteristic of these models is their modulating heating capacity. Both units can adjust their output based on the heating demands of the space, ensuring optimal comfort without unnecessary energy waste. This modulation capability means that the units can operate efficiently even in varying weather conditions, providing reliable warmth throughout the year.

The Rinnai IB35ETRN and IB35ETRLC are also designed with user-friendly interfaces that allow for easy operation and monitoring. Features such as programmable thermostats enable homeowners to set desired temperatures for different times of the day, further enhancing energy savings. The intuitive control systems provide clear displays of performance metrics, making it simple to manage heating requirements.

Safety and reliability are paramount, and both models are equipped with several protective features, including overload protection and automatic shutoff in the event of an issue. This technology ensures the safety of the home and adds peace of mind for users.

In summary, the Rinnai IB35ETRN and IB35ETRLC are state-of-the-art heating solutions that combine efficiency, compact design, and advanced technology. With their impressive AFUE ratings and modulating heating capacities, these models are ideal for those seeking reliable, energy-efficient heating systems for their homes or light commercial spaces. Rinnai's commitment to quality and innovation positions these boilers as top choices in today's market.