Specifications, R63LSe R75LSe R94LSe R98LSe

Specifications

Model		R63LSe	R75LSe	R94LSe	R98LSe		R98LSe-
Model		R63LSe	R75LSe	R94LSe	R98LSe			ASME
								ASME

Minimum Gas Consumption Btu/h		22,200	15,000			19,000

Maximum Gas Consumption Btu/h		150,000	180,000	199,000	237,000
Hot water capacity (Min - Max) *		0.6 - 6.3 GPM	0.6 - 7.5 GPM	0.6 - 9.4 GPM	0.6 - 9.8 GPM
Hot water capacity (Min - Max) *		(2.3 - 24 L/min)	(2.3 - 28 L/min)	(2.3 - 35.5 L/min)	(2.3 - 37 L/min)
		(2.3 - 24 L/min)	(2.3 - 28 L/min)	(2.3 - 35.5 L/min)	(2.3 - 37 L/min)

Hot water capacity, (45ºF rise)		5.3 GPM	6.6 GPM	7.4 GPM	8.7 GPM
Hot water capacity, (45ºF rise)		(20 L/min)	(25 L/min)	(28 L/min)	(33 L/min)
		(20 L/min)	(25 L/min)	(28 L/min)	(33 L/min)

Default Temperature Setting (no controller)				120º F (49º C)

Temperature Controller Default Temperature Setting				104º F (40º C)

Maximum Temp Setting (Commercial **)		160º F (71º C)			185º F (85º C)
Maximum Temp Setting (Residential)			Selectable at 120º F (49º C) or at 140º F (60º C)

Minimum Temperature Setting				98º F (37º C)
Weight		36.4 lb	46 lb			55 lb
Weight		(17 kg)	(21 kg)			(25 kg)
		(17 kg)	(21 kg)			(25 kg)

Efficiency Rating				83.0%
Noise level				49 dB (A)

	Normal	36 W	50 W	55 W		72 W
Electrical	Standby			2 W
Consumption	Standby			2 W
Consumption
	Anti-frost Protection	74 W	100 W			116 W
By-Pass Control		Fixed			Electronic

Minimum Gas Supply	Natural Gas			5.0 inch W.C.
Pressure	Propane			8.0 inch W.C.

Maximum Gas Supply	Natural Gas			10.5 inch W.C.
Pressure	Propane			13.5 inch W.C.

Type of Appliance		Temperature controlled continuous flow gas hot water system.
Operation		With or without temperature controls, mounted in kitchen, bathroom, etc.

Approved Gas Type		Natural Gas or Propane - Ensure unit matches gas type it's being installed on.

Connections		Gas Supply: 3/4" MNPT, Cold Water Inlet: 3/4" MNPT, Hot Water Outlet: 3/4" MNPT
Ignition System			Direct Electronic Ignition

Electric Connections		Appliance: AC 120 Volts, 60Hz. Temperature Control: DC 12 Volts (Digital)
Water Temperature Control			Simulation Feedforward and Feedback.

Water Supply Pressure		Minimum Water Pressure: 20 PSI (Recommended 30-80 PSI for maximum performance)
Maximum Water Supply Pressure				150 PSI

Temperature Control Cable			Non-Polarized Two Core Cable (Minimum 22 AWG)

*Minimum flow may vary slightly depending on the temperature setting and the inlet water temperature.

**for commercial and hydronic applications requiring higher temperatures.

Rinnai is continually updating and improving products. Therefore, specifications are subject to change without prior notice.

The maximum inlet gas pressure must not exceed the value specified by the manufacturer. The minimum value listed is for the purpose of input adjustment.

VA Series Outdoor LS Manual

R98LSE-ASME specifications

The Rinnai R98LSE-ASME is a high-efficiency tankless water heater that stands out for its powerful performance and advanced technology. This model is particularly designed to meet the demands of residential and commercial applications, delivering consistent hot water whenever it is needed. With a maximum flow rate of 9.8 gallons per minute, it is able to provide hot water for multiple outlets simultaneously, making it an excellent choice for busy households and commercial settings.

One of the main features of the Rinnai R98LSE-ASME is its Energy Star rating, which signifies its exceptional energy efficiency. This rating not only helps reduce energy bills but also minimizes the environmental impact by consuming less gas over time. The unit is engineered with advanced condensing technology, which captures and reuses heat from exhaust gases, enhancing efficiency and cutting waste.

The R98LSE-ASME operates on a natural gas or propane option, allowing for flexibility depending on the available fuel supply. Its powerful burner system can quickly heat water to the desired temperature, ensuring that there's no waiting time for hot water. Additionally, the unit is designed with a temperature lock feature, which allows users to set and maintain their preferred water temperature easily, enhancing safety and convenience, especially in households with children.

Installation of the Rinnai R98LSE-ASME is straightforward, as it comes with a detailed manual and can be fitted into various environments, including closets and small spaces, due to its compact design. This versatility provides significant savings on space compared to traditional tank water heaters.

Safety is also a priority for Rinnai. The R98LSE-ASME includes a comprehensive set of safety features such as overheat protection, freeze protection, and built-in diagnostic codes for quick troubleshooting. This ensures reliable operation and peace of mind for users.

In summary, the Rinnai R98LSE-ASME is a high-performance tankless water heater that combines efficiency, reliability, and advanced technology. With features such as a high flow rate, Energy Star certification, and robust safety measures, it is well-suited for both residential and commercial applications, making it a worthy investment for anyone seeking a dependable hot water solution.