Rinnai R98LSE-ASME installation manual Mounting on the wall, Outline of Temperature controller

Page 31

Temperature Controller Installation

Mounting on the wall

1.

Determine a suitable location for the

 

controller.

2.

Make three holes in the wall as shown.

Outline of Temperature controller

3.

Run the cable between the controller and the

 

Rinnai water heater or the controller and

 

another controller.

4.

Remove the face plate from the temperature

 

controller using a screw driver.

5.

Connect the cable to the temperature controller.

6.

Mount the controller to the wall using the

 

holes drilled in step 2.

securing screw

wiring hole

securing screw

1-21/32"

3-5/16"

Connecting to the R75LSe, R94LSe, R98LSe, and R98LSe-ASME

7.Disconnect the power from the Rinnai water heater.

8.Remove the cover of the Rinnai water heater.

9.Remove the plastic cover from the PCB and electrical connections.

10.Thread the cable through the access hole at the base of the unit and connect the wires to the controller terminals on the right hand side bottom of the PCB.

11.Secure the controller cable using the clamp provided.

12.Replace plastic cover over PCB and then replace the cover of the Rinnai water heater.

TEMPERATURE CONTROL

CONNECTION TERMINALS

TEMPERATURE

CONTROL CABLE

CABLE CLAMP

VA Series Outdoor LS Manual

31

Page 30 Page 32
Image 31
Page 30 Page 32
Contents ANS Z21.10.3 CSA REU-VA3237WTable of Contents R63LSe R75LSe R94LSe R98LSe SpecificationsSafety Definitions Consumer Safety InformationSafety Behaviors and Practices Safety Features Operating Instructions Features Available on Temperature ControllersFeatures Description of OperationMC-91-1US & MCC-91-1US Temperature Controllers ModelsBC-100V-1US Temperature Options Without a Temperature Controller Setting the TemperatureMCC-91 Temperature Controller Temperature RangesSetting the Sound Volume Voice Prompt Re-setting the Maximum TemperatureSetting the Water Volume Using the Water Smart / Bath Fill FunctionOverview Models MC-91 and MCC-91 Setting Controller to MuteSetting the Clock Filling the TubMaintenance Error Code Table Error CodesError Fault Remedy Code Accessing Operating Information Trouble Shooting for Common IssuesWater Quality Rinnai Water Heater Flushing the Heat Exchange Error Code LC orGeneral Instructions Installation InstructionsAttachment of the Water Heater Clearances from ApplianceGas Piping Electrical ConnectionGeneral Instructions Pipe Sizing Procedure Example Pressure Relief Valve Water PipingFreeze Protection Rinnai Water Heater Freeze Protection PipingQTY Recommended Piping for Basic InstallationFor this application Recommended Piping for Circulation SystemsYears On Heat Exchanger Years On Parts Optional Piping for Circulation SystemsFlue Terminal Clearances ANS Z21.10.3 CSA Description Canadian Installations US Installations Additional Clearances Vent Terminal Guidelines High Altitude InstallationsConnecting Multiple Water Heaters R98LSe, R98LSe-ASME, R94LSe, R75LSeCable Lengths and Size Temperature Controller InstallationConfigurations LocationMounting on the wall Outline of Temperature controllerConnecting to the R63LSe Operating Instructions For Your Safety Read Before OperatingPressure Drop Curve Technical DataOutlet Flow Data Pumps Temperature SettingReplacement Space HeatingR63LSe, R75LSe, R94LSe R98LSe, R98LSe-ASME DimensionsHOT Ladder DiagramLimited Warranty Warranty InformationConsumer Support What will Rinnai do? Rinnai’s other fine products 103 International Drive

R98LSE-ASME specifications

The Rinnai R98LSE-ASME is a high-efficiency tankless water heater that stands out for its powerful performance and advanced technology. This model is particularly designed to meet the demands of residential and commercial applications, delivering consistent hot water whenever it is needed. With a maximum flow rate of 9.8 gallons per minute, it is able to provide hot water for multiple outlets simultaneously, making it an excellent choice for busy households and commercial settings.

One of the main features of the Rinnai R98LSE-ASME is its Energy Star rating, which signifies its exceptional energy efficiency. This rating not only helps reduce energy bills but also minimizes the environmental impact by consuming less gas over time. The unit is engineered with advanced condensing technology, which captures and reuses heat from exhaust gases, enhancing efficiency and cutting waste.

The R98LSE-ASME operates on a natural gas or propane option, allowing for flexibility depending on the available fuel supply. Its powerful burner system can quickly heat water to the desired temperature, ensuring that there's no waiting time for hot water. Additionally, the unit is designed with a temperature lock feature, which allows users to set and maintain their preferred water temperature easily, enhancing safety and convenience, especially in households with children.

Installation of the Rinnai R98LSE-ASME is straightforward, as it comes with a detailed manual and can be fitted into various environments, including closets and small spaces, due to its compact design. This versatility provides significant savings on space compared to traditional tank water heaters.

Safety is also a priority for Rinnai. The R98LSE-ASME includes a comprehensive set of safety features such as overheat protection, freeze protection, and built-in diagnostic codes for quick troubleshooting. This ensures reliable operation and peace of mind for users.

In summary, the Rinnai R98LSE-ASME is a high-performance tankless water heater that combines efficiency, reliability, and advanced technology. With features such as a high flow rate, Energy Star certification, and robust safety measures, it is well-suited for both residential and commercial applications, making it a worthy investment for anyone seeking a dependable hot water solution.
Top Page Image Contents