Electrical Box Installation
Electrical installation should be done in accordance to local codes and regulations.
Step 1. Cut the tile where the electrical base box is going to be secured.
Step 2. Using (commercially available) hardware depending on electrical installation environment, install the electrical box and secure it to the plate.
Step 3. Make all electrical connections at this time.
Electrical Box
Electrical Box
PP-FCMA-QL Adjustments
Step 1. Loosen the M8 x 20mm screws and M8 flat washers. This will allow you to slide the base box laterally.
Please refer to the purchased base box for further operating instructions.
Ceiling Tile
M8 Flat
Washer
M8 x 20mm
Phillips Head
Screw
Page 10 | Installation Instructions |