FPUSV4000 VARIABLE SPEED PUMP AND FPU4500 FIXED SPEED PUMP
GENERAL DESCRIPTION
The OMEGAFLEX@ FPUSV4000 variable speed drives are powered by a DC gearmotor. A specially designed electronic speed control system converts AC to DC while providing smooth accelerated control over the entire flow range. The three position on/ off switch allows the user to maintain speed setting when unit is turned off or reversed. The FPU4500 are fixed speed AC units.
FEATURES
*1. Electrical: I 15 VAC, 60HZ
2.Reversible Variable Speed Control for Variable Flowrates.
3.Maximum and Minimum Speed Control Adjustment.
*4. Factory Preset Flowrate: 2000 ml/min.
S. Replaceable Motor Brushes. (Replacement instructions page 5.)
6. External Fuse Holder. (Fuse replacement instructions page 5.)
INSTALLATION INSTRUCTIONS
1.POWER REQUIREMENTS: Voltage and frequency of power supply must be the same as shown on unit.
2.WIRING CONNECTIONS: All wiring and electrical connections must comply with local and national electrical codes.
3.MOUNTING: FPU4500 Case enclosed model may be placed on any flat surface assuring space is provided at the back of the case for air circulation through ventilation holes. FPU4500 Bracket or Case mount assuring space provided for air flow. Do not allow tubing to be crimped.
4.MOUNTING LOCATION: Pump should be placed in a dry location with adequate cooling provided. The ambient temperature should not exceed 35°C.
WARNING
This unit should not be used in outdoor or hazardous locations
CAUTION
Motor life will be drastically reduced if left in the stalled position for extended periods.
1