Installation Instructions, View a | Manitowoc Ice K00364 manual

Universal Thermostat Kit

Installation Instructions

FOR USE WITH DISPENSERS ONLY

THIS CONTROL KIT IS INTENDED TO REDUCE OVERFILL AND CONDENSATION ISSUES

1.Remove all ice from dispenser.

2.Disconnect all power to the ice machine and dispenser at the service disconnect or fuse/breaker panel.

3.Move the ice machine and dispenser away from the wall for easier access.

4.Remove all panels and control box cover.

5.If an ice machine is already installed on the dispenser, raise and support the right side of the ice machine. Install the mounting bracket on the right-hand side of the dispenser 6” from the right rear corner. Compress the bracket to the thickness of the dispenser wall and tighten the two screws.

6.Route thermistor wire out back of the ice machine/dispenser (lower the ice machine, if supported). Remove unused knockout on the ice machine back panel, install romex connector and route wire into the ice machine compressor compartment.

7.Normally the controller can be mounted on the bulkhead flange. If not, a suitable area must be found for your model. Use controller bracket to locate mounting holes on the flange of the bulkhead. Drill two 9/32" diameter holes (used to mount the controller bracket - see View A). Do not mount the controller, at this time.

8.Route the four wires from the temperature control to the control box (insuring that the wires will not come in contact with any refrigeration tubing).

IMPORTANT:

The thermostat must be wired to match the voltage of the ice machine. The thermostat is pre-wired for 115 volts. Rewire thermostat, if your ice machine is

240 volts.

9.The control box line voltage wiring offers two options: ∙ Connect thermostat L1 (brown) and L2 (blue) wires to contactor (incoming line voltage side) L1 and L2.

∙Disconnect incoming power line wire nuts. Remove quick-connect fittings from brown and blue wires and strip 1/2” of insulation from the wires. Connect incoming power L1, ice machine L1, and thermostat L1 (brown) wires together with wire nut. Connect incoming power L2, ice machine L2, and thermostat L2 (blue) wires together with wire nut.

10.Disconnect the red male/female connector bin switch wire and connect the red male wire from the controller to the red female bin switch wire.

11.Connect the white male bin switch wire to the white female wire of the controller.

12.Restore all power to the ice machine and the dispenser at the service-disconnect or fuse/breaker panel.

13.The factory setting on the thermostat will be correct for most applications. Adjust only when necessary.

14.With two screws, secure the controller bracket assembly to the flange of the bulkhead.

15.Reinstall the control box cover and all panels.

Position the controller in a suitable location. It can be installed here on most ice machines. Use bracket to locate mounting holes - drill two 9/32" holes through bulkhead flange to secure controller

Route sensor wire between dispenser and ice machine

View A

Install romex connector in a vacant knockout and route sensor wire into compressor compartment

K00364 specifications

The Manitowoc Ice K00364 is a cutting-edge ice machine designed to meet the demanding needs of commercial kitchens and businesses that require consistent and high-quality ice production. Renowned for its reliability and efficiency, this unit stands out in the competitive market of ice machines, making it an essential investment for foodservice operations.

One of the main features of the Manitowoc Ice K00364 is its advanced ice-making capability. The machine produces gourmet-quality ice cubes that are ideal for a variety of applications, from beverages to food displays. With a production capacity of approximately 600 pounds of ice per day, it’s suited for medium to large-scale operations, ensuring businesses can keep up with their ice requirements during peak hours.

The K00364 incorporates state-of-the-art technology that enhances its performance and energy efficiency. The unit is equipped with an easy-to-use digital control system that allows operators to monitor and manage the ice-making process effortlessly. This system includes diagnostics and alerts for maintenance, ensuring the machine operates at optimal levels and minimizing potential downtime.

One of the defining characteristics of the Manitowoc Ice K00364 is its durable construction. Built with high-quality materials, the machine is designed to endure the rigors of a busy commercial kitchen. Its stainless-steel exterior not only provides a sleek appearance but also ensures resistance to rust and corrosion, promoting longevity and ease of cleaning.

Another technological innovation featured in this unit is its energy-saving capabilities. The Manitowoc Ice K00364 is engineered to consume less water and energy compared to traditional ice machines, making it an eco-friendly option. This energy efficiency not only helps reduce operational costs but also aligns with many businesses' sustainability goals.

The machine's compact design is also noteworthy, as it allows for flexible installation in various kitchen layouts without compromising space. With adjustable legs, it can be leveled on uneven surfaces, enhancing stability and performance.

In summary, the Manitowoc Ice K00364 is an advanced ice machine that combines high production capacity with cutting-edge technology, durability, and energy efficiency. Its features make it an ideal choice for restaurants, bars, and other establishments that prioritize quality and reliability in their ice supply. Investing in the K00364 ensures that businesses can consistently deliver exceptional service while meeting their operational needs.