Installing the iDR-8
The
Fit the face plate once you have configured the settings with the front panel menu system and fitted any labels required to identify the key and LED functions. The plate is packed separately. Fit this using the 4 hex screws and the 2mm Allen driver provided.
Allow adequate space behind the units for plugging in the connectors. The dimensions are shown below.
Plug the cables into their correct sockets. We recommend that you colour code or label the cables to avoid errors when replugging them in the future.
Do not obstruct the side ventilation slots. Ensure adequate air flow around the units.
Do not install the units directly above or below heat or electromagnetic generating equipment such as power supplies and amplifiers.
To avoid damage to the internal assemblies do not fit screws or drill through the case metalwork.
Do not remove the cover of the iDR unit. There are no user serviceable parts inside. All configuration is carried out using the front panel menus and iDR System Manager software running on a PC
| 483mm |
|
|
| |
| 19" | 443mm |
|
| |
|
| 17.4" |
| 88mm | |
| AUDIO MIX PROCESSOR | |
92mm |
| |
3.5" |
| |
3.6" | 2U |
|
|
|
Remove 2x rack ears
M4 Torx T20
Fit 4x feet
44mm 48mm 1.7" 1.9" 1U
Remove 2x rack ears
M3 Torx T10
Fit 4x feet
44mm 48mm 1.7" 1.9" 1U
Remove 2x rack ears
M3 Torx T10
Fit 4x feet
435mm | 360mm |
17.1" | 14.2" |
75mm
3"
iDR-in and iDR-out EXPANDERS
lock | link | power | |
|
|
| |
|
|
| AUDIO INPUT EXPANDER |
lock | link | power | |
|
|
| |
|
|
| AUDIO OUTPUT EXPANDER |
307mm |
|
| 232mm |
12" |
|
| 9.1" |
75mm
3"
iDR-switch EXPANDER
link power
24 IN 16 OUT SWITCH CONTROLLER
209mm | 144mm |
8.2" | 5.7" |
65mm
2.6"
14 |
