M-Audio manual Transferring from Delta 66 to DAT, monitoring with DAT

6.Within your recording software, select “S/PDIF In Delta-66,” as the audio input device. The Delta input appears as a stereo pair.

7.Start your software recording and then start your DAT material playing. You should be able to hear the DAT material through your sound system.

Transferring from Delta 66 to DAT, monitoring with DAT

1.Connect the Delta 66’s S/PDIF Out to the DAT’s coaxial S/PDIF Input using a good quality cable.

2.Connect the DAT analog outputs to some type of amplified sound system. The sound system should be equipped with speakers or headphones.

3.Because you will be playing back at the recorded sample rate, you will want to set the Delta 66’s master clock to use the Delta 66’s internal crystal. Do this by opening the Hardware Settings page of the Delta Control Panel software and

38