LOREX Technology QLR1660 instruction manual Denied IP address, Accepted IP address in denied

QLR1660 User Manual

▪Filtering: Setup the network filtering. You can appoint IP address that will be denied connection. Also, within the IP address range, you can appoint specific IP addresses to accept.

-Denied IP address:

Input the IP address that will be denied.

- Accepted IP address in denied:

Input the IP address that you wish to be exempted from the denied IP range.

You can control the network connection to the QLR1660 Server efficiently by filtering IP address.

[NOTE]

*When use the Internet Gateway (IP Sharer), you should set below;

1)QLR1660 Server Computer Setting: The Internet Protocol (TCP/IP) Settings of your Computer should be set to ‘Use the Static IP’ because this Computer is used as the Virtual Server for QLR1660.

2)Internet Gateway (IP Sharer) Setting: You should set Virtual Server Setting required for QLR1660 Server in your

Internet Gateway (IP Sharer).

=> Port Numbers for Video and Audio and P/T/Z camera and Remote Search of QLR1660 Server will be each fixed -2000, 2001, 2002, 2003- as the video port number (2000) inputted. These Ports must be opened to permit Client and Search connection via external network.

3)Firewall Setting: Port Numbers for Video and Audio and P/T/Z camera and Remote Search -2000, 2001, 2002, 2003 – have to be opened to permit Client and Search connection via external network.

*For the detail contents of 2) and 3) sections, refer to your IP Sharer and Firewall manuals.

30