LOREX Technology QLR1660 instruction manual Digital Video Recorder

DIGITAL VIDEO RECORDER

[NOTE 1]

1.In case of the QLR1660 Server Network is set with Static IP address,

you should enter ‘Static IP address’ of QLR1660 Server to connect in ‘IP/Product No’ section.

2.In case of the QLR1660 Server Network is set with Dynamic IP address or Private IP address (IP Sharer), you should enter ‘Product Number’ of QLR1660 Server to connect in ‘IP/Product No’ section.

3.In case of the QLR1660 Server Network is set with PPPoE connection (Dial-up connection)

you should enter IP address ‘[100.0.0.1]’ of QLR1660 Server to connect in ‘IP/Product No’ section.

[NOTE 2]

<* The ‘Dial-up Connection’ Network Setting of Computer for QLR1660, refer the ‘PPPoE Manual’ included inside the Install CD by all means.>

1.In case of network connection by ‘Dial-up Connection’, the Server Address is specified by [100.0.0.1].

2.The ‘Dial-up Connection’ is the Point to Point Communication. So, ‘Dial-up Connection’ can connect the only one QLR1660 Client with the only one QLR1660 Server.

▶Local setup login password: Changes the client local setup login password by clicking ‘Change’.

[NOTE] The default password for the local setup login of Client is ‘1111’

▶Confirm password: Check to confirm password before you execute the following

–Setup, Search, Stop Schedule Record, Shut-down.

69