QLR1660 User Manual
■ Setup button | Click here to enter the Setup Mode. |
| [NOTE] The default password for user of Client is ‘1111’. |
■ Search button | Click here to enter the Search mode. |
| You can search recordings by camera number, date, time and event. |
| [NOTE] The default password for user of Client is ‘1111’. |
■ Shutdown button | Click this button to shutdown the main server application. |
| [NOTE] The default password for user of Client is ‘1111’. |
■ Pan/Tilt/Zoom | It enables you to control remotely the P/T/Z camera that you select to |
Control buttons | move and get the scene according to your direction dynamically. |
-The following controls are available:
▪Camera Selection to control Pan/Tilt/Zoom/Focus
▪Tilt up/down (▲/▼)
▪Pan left/right (◄/►)
▪Zoom in/out
▪Focus in/out
▪Auxiliary (1,2,3)
| (Refer to ‘Appendix |
■ Audio Speaker(On/Off) | Use for |
/ Volume Control | Server system. |
buttons | - Clicking the speaker button enables you to listen to the |
| sound transmitted from the connected QLR1660 Server. |
-Control the volume by moving the volume control button.
[NOTE] For
■Connect button
Click to connect/disconnect with the Remote Server.
■Recording On/Off buttons
▶Schedule Recording button (
)
:You can enable Schedule Recording according to Setup by clicking the ‘Schedule Rec.’ button.
[NOTE] If ‘Schedule Rec.’ button is off, all kind of recording (video and audio) components configured in the Setup mode are disabled
▶Group buttons (A,B)
:By clicking each group button (A,B), displays 8 channel recording buttons belongs to each group
▶Channel Recording buttons (1~16)
:Using these buttons, you are able to record each channel by clicking the desired channel. The Continuous record icon (
) will be displayed on the camera screen.
58