LOREX Technology QLR1660 instruction manual Camera Setup, For each camera, Configuration

DIGITAL VIDEO RECORDER

2-2. Camera Setup

▶Camera select: Select a camera to setup.

▶For each camera

▪Camera location: Describe the location where the selected camera is installed. This name will be displayed on screen when viewing this camera.

▪PTZ Camera: If using a camera, select the type of PTZ camera connected to this channel. Click the scroll button to bring up a list of PTZ cameras that are currently available.

▪PTZ Camera ID: Enter the switching ID of the PTZ camera connected to this channel.

(Refer to ‘Appendix -1.Pan/Tilt/Zoom Camera Installation’.)

▶Configuration

▪Recording video quality: Setup the recording video quality of selected camera.

▪Record maximum possible frames: Setup the record maximum frame rate of selected camera. (1~30 fps)

▪Record all frames when event occurs: If checked, it records all frames of video of selected camera when event occurs at selected camera.

▪Pre-alarm recording duration: Enter the pre-alarm recording duration (time) of selected camera when event occurs at selected camera. (max 5 sec.)

▪Popup window when event occurs: If checked, in case of the QLR1660 Server window is minimized in execution, popup window when event occurs at selected camera.

▪Same configuration for all cameras: If checked, configuration (video quality, record frame rate, etc.) of all cameras will be set the same as this camera.

31