JVC AV 48P777, AV-48P787, AV-56P787 Auto Clock Set, Manual Clock Set, Quick Setup, To be continued

Quick Setup

Auto Clock Set

Before you use any of your TV’s timer functions, you must first set the clock. You may precisely set your clock using the XDS time signal broadcast by most public analog broadcasting stations. If you do not have this in your area, you will have to set the clock manually. See manual clock set below. To set the clock using the XDS signal:

Set Clock

Mode			Auto
Time			-- : --	--
Time Zone			Atlantic
D.S.T.			On
			Set
		BACK	MENU
Select	Operate	Back		Exit

è To choose "Auto"

†To "Time Zone"

è To select your time zone: (Atlantic, Eastern, Central, Mountain, Pacific, Alaska or Hawaii)

†To move to "D.S.T." (Daylight Savings Time) √® To turn "On or Off"

†To "set"

Press the OK button

Once you press OK, you will move to the "Auto Tuner Setup" Plug-In Menu automatically.

Notes:

•D.S.T. can be used when it is set to "On" in the "Set Clock" menu.

•Only when the "Mode" is set to "Auto", the Daylight Savings Time feature automatically adjusts your TV’s clock for Daylight Savings. The clock will move forward one hour at 2:00 am on the first Sunday in April. The clock will move back one hour at 2:00 am on the last Sunday in October.

•You will have to reset the clock after a power interruption. You must set the clock before operating any timer functions.

Manual Clock Set

To set your clock manually (without using the XDS signal), choose "Manual". If you choose "Auto", see auto clock set above.

Set Clock

Mode			Manual
Time			10 : 30 AM
Time Zone			Atlantic
D.S.T.			On
			Set
		BACK	MENU
Select	Operate	Back	Exit

Note:

è To choose "Manual"

†To "Time"

è To set the hour

†To minute

è To set the minute

†To "Time Zone"

è To select your time zone: (Atlantic, Eastern, Central, Mountain, Pacific, Alaska or Hawaii)

†To move to "D.S.T." (Daylight Savings Time) √® To turn "On or Off"

†To "Set"

Press the OK button

Once you press OK, you will move to the "Auto Tuner Setup" Plug-In Menu automatically.

•You will have to reset the clock after a power interruption. You must set the clock before operating any timer functions.

(To be continued...)

22