Barco MFGD 2621, MFGD 3621 user manual Click on the file, Setup.exe, and click Open

Display controller software installation

Command line (Silent) Install of Drivers and Software

Specifying the silent install option causes most of the GUI associated with the installer to disappear. A background progress window will still be visible, but no user input will be required.

The silent install behavior is dictated by the SETUP.INI file. Each application is allowed to have separate command-line parameters for normal and silent installs.

To install the drivers and software silently, please follow the steps below:

1.Insert the BARCO MEDICAL IMAGING DISPLAY SYSTEM CD-ROM into your CD/DVD drive. When the Barco Product Installation Wizard starts click “Cancel”.

2.Click the Start button in the task bar.

3.Click Run.

4.Click Browse and

a)browse to the root directory of the BARCO MEDICAL IMAGING

DISPLAY SYSTEM CD-ROM.

b)Click on the file, Setup.exe, and click Open.

or

a)Browse to the root directory of the location where you saved the contents of your BARCO MEDICAL IMAGING DISPLAY SYSTEM CD-ROM.

b)Click on the file, Setup.exe, and click Open.

5.In the Open address window, place your cursor at the end of the line of text that appears and add the following text after Setup.exe, a space and -silent. Click OK.

Example (where D is the name of your CD/DVD drive): D:\Setup.exe -silent

See figure 21 for an example of how the command line window should look when using the silent install from the BARCO MEDICAL

IMAGING DISPLAY SYSTEM CD-ROM.

56