![](/images/new-backgrounds/1205975/205975107x1.webp)
Display controller software installation
c)Click Browse and browse to the root directory of the BARCO MEDICAL IMAGING DISPLAY SYSTEM
Setup.exe, and click Open.
d)Click OK.
or
a)Browse to the root directory of the BARCO MEDICAL IMAGING DISPLAY SYSTEM
Setup.exe.
10.Click Next on the Welcome page.
11.Click Next on the Components to be installed page.
12.Follow the wizard’s
Note: When the page shown in figure 20 appears you may either click Next to accept the default settings or if you know the settings required for your viewing application, you may select them now and then click Next. You may change these settings later by using the Barco pages of the Windows Display Control Panel.
Figure 20
Please refer to your application manuals for information on the correct Palette and Drawing modes to select.
54