Barco MFGD 3621, MFGD 2621 user manual Display controller software installation

Display controller software installation

Installing the BARCOMED display controller drivers and software

Note: The installation dialog will display in English if your operating system’s language is not supported.

This process applies to the following versions of Windows:

•Windows 2000 Professional,

•Windows XP Professional,

•Windows Professional x64 Edition,

•Windows Server 2003, and

•Windows Server 2003 x64 Edition.

You will need to install the BARCO MEDICAL IMAGING DISPLAY SYSTEM drivers and software in the following cases:

•After you have installed the display controller(s) for your BARCO MEDICAL IMAGING DISPLAY SYSTEM in your system for the first time.

•After you have reinstalled or upgraded your operating system.

8.Start your system. When the Found New Hardware Wizard comes up, click Cancel. When the System Settings Change window asks you to restart your computer, click No.

Note: Both displays connected to a single display controller must have the same physical orientation and resolution in order to be attached to the Windows desktop.

9.Run the Barco Product Installation Wizard.

The Barco Product Installation Wizard should start automatically when you insert the Barco System CD-ROM into your CD drive after the operating system has started. If your CD drive’s auto-run is not enabled or the Barco Product Installation Wizard does not start automatically, you can run the Barco Product Installation Wizard manually by following these steps:

a)Click the Start button in the task bar.

b)Click Run.

53