Barco MFGD 3621, MFGD 2621 user manual To clean the LCD panel

Models: MFGD 3621 MFGD 2621

1 119
Download 119 pages 51.9 Kb
Page 95
Image 95

LCD panel

Figure 29

To clean the LCD panel:

Take care not to touch the I-guard light sensor on the LCD panel.

Dust particles on the LCD panel may be blown away by using a dust remover. E.g., DUST OFF 67 (KONTAKT Chemie).

A dust remover is composed of a blend of compressed liquid gases functioning as propellant. They provide a jet of dry inert gas that acts like compressed air for a quick and safe removal of dust particles and other dry contaminants on the surface of the lcd panel or the glass panel.

Attention: The dust remover contains a liquid gas. If you shake the can or move the can too fast while spraying, you may blow drops of liquid on the panel surface!

If this is the case, clean the panel as described below.

If the LCD panel is dirty or wet, clean the panel using a lint-free, nonabrasive cloth, lightly moistened with a solution of 25% Isopropyl Alcohol (IPA) and 75% de-ionized or distilled water. E.g.: Cleareen, a product of Certified Laboratories.

In case you do not dispose of these products, use plain water instead.

Take another clean, dry, soft, lint-free cloth and gently wipe the glass dry.

95

Page 95
Image 95
Barco MFGD 3621, MFGD 2621 user manual To clean the LCD panel