8-3. Servicing Air Cleaner
|
| Y | Stop engine. |
|
| Y Do not run engine without air | |
|
|
| cleaner or with dirty element. En- |
|
|
| gine damage caused by using a |
|
|
| damaged element is not covered |
|
|
| by the warranty. |
|
| . The air cleaner primary element can | |
| 4 |
| be cleaned but the dirt holding ca- |
|
| pacity of the filter is reduced with | |
|
|
| |
1 |
|
| each cleaning. The chance of dirt |
|
| reaching the clean side of the filter | |
|
|
| |
|
|
| while cleaning and the possibility of |
2 |
|
| filter damage makes cleaning a risk. |
|
|
| Consider the risk of unwarrantable |
|
|
| equipment damage when determin- |
| 3 |
| ing whether to clean or replace the |
|
|
| primary element. |
|
|
| If you decide to clean the primary |
|
|
| element, we strongly recommend |
|
| 8 | installing an optional safety element |
|
| to provide additional engine protec- | |
|
|
| |
| 7 |
| tion. Never clean a safety element. |
|
|
| Replace the safety element after |
|
|
| servicing the primary element three |
|
|
| times. |
|
| 1 | Air Cleaner |
6 | 9 | 2 | Service Indicator (Optional) |
| 3 | Window | |
|
| ||
|
| 4 | Reset Button |
5 |
| Service air cleaner element if red band | |
|
| appears in window. A green band means | |
|
| air cleaner is okay. Press button to reset | |
|
| indicator. | |
|
| Clean or replace primary element if dirty | |
|
| (see note above before cleaning). Re- | |
|
| place primary element if damaged. Re- | |
|
| place primary element yearly or after six | |
|
| cleanings. | |
|
| 5 | Housing |
|
| 6 | Safety Element (Optional) |
|
| 7 | Primary Element |
|
| 8 | Cover |
|
| 9 | Dust Ejector |
|
| To clean air filter: |
Keep nozzle 2 in (51 mm) from element.
Wipe off cover and housing. Remove cover and dump out dust. Remove element(s). Wipe dust from inside cover and housing with damp cloth. Reinstall safety element (if present). Reinstall cover.
Y Do not clean housing with air hose.
Clean primary element with compressed air only.
Air pressure must not exceed 100 psi
BlowInspect(690 kPa). Use 1/8 in (3 mm) nozzle and keep nozzle at least 2 in (51 mm) from inside of element. Replace primary ele- ment if it has holes or damaged gaskets.
Reinstall primary element and cover (dust ejector down).
aircleaner4 9/02− 802 495 / Ref.