Troubleshooting
(to the next page)
Layout of rollers inside the printer
Below is a diagram of the layout of rollers inside the printer. Refer to this diagram in the event of card jams and when cleaning the rollers.
Retransfer film cassette | Ink ribbon cassette |
|
|
| Thermal head | |
|
|
| Magnetic head | |
|
| Card turnover table | ||
|
| Card feed rollers | ||
|
| Card jams | (see p.50) |
|
|
| J a m ( T u r n O v e r ) |
| |
Card jams | (see p. 50) | Cleaning unit |
| |
J a m ( T r a n s f e r ) |
|
|
| |
|
|
| Card feed rollers | |
|
|
| Card jams | (see p.49) |
|
|
| J a m ( H o p p e r ) | |
Retransfer roller (heat roller) |
|
|
|
|
Bend remedial roller (heat roller)
All rollers require routine cleaning.
•The card feed rollers, retransfer roller and bend remedial roller can be cleaned on cleaning mode.
(See p.42, 43 in this manual.)
•The cleaning unit can be cleaned by water washing.
(See p.40 in this manual.)
How to clean the feed roller
1.Open the card tray, and take out the cards from the tray.
2.Move the card bracket until it locks.
3.Clean the feed roller with felt (sold separately) soaked with absolute alcohol(ethanol).
Feed roller
45
