Network setting | Ultra electronic Prima 3 specification

(to the next page)

NETWORK setting

CAUTION

• Determine the “Network Setting” items according to the instruction of the		network administrator for the location
where the printer unit is installed.

•Other network devices may be affected if the “Network Setting” is incorrect.

> N e t w o r k >

EXIT

Exit user mode

MENU

ENTER

			Printer name setting on the network
> > P r i n t e r N a m e			• Name that can be set from the printer are PRINTER01-10.
> > P r i n t e r N a m e			Please set other name from the host computer.
			Please set other name from the host computer.
	P R I N T E R	0 1	�
	P R I N T E R	0 1
EXIT	MENU	Press	ENTER	to save.
EXIT	MENU	Press	to select the setting value and press	to save.
			(The electronic beep sounds .The beep will not sound if the buzzer
			mode setting is set to off.)
> > H o s t	I n t e r f a c e		Interface type(LAN,USB)
		L A N	• Even when LAN is selected for this setting initialization,
EXIT	MENU		the setting will become USB when USB interface is connected.
EXIT	MENU
		Press	ENTER	to save.
		Press	to select the setting value and press	to save.
			(The electronic beep sounds .The beep will not sound if the buzzer
			mode setting is set to off.)
> > D H C P
		O n	Availability of DHCP(On, Off)
		O n
EXIT	MENU	Press	to select the setting value and press ENTER	to save.
			(The electronic beep sounds .The beep will not sound if the buzzer
			mode setting is set to off.)
			�

Memo

• When "DHCP On" is selected, the IP address, subnet mask, and default gateway values are automatically acquired from the DHCP server. If the DHCPserver is not found, settings of the following "IP Address" will apply.

• When "DHCP Off" is selected, specify the "IP Address", "Subnet

Mask", and "Default Gateway" gields accordingly.

�

> > I P A d d r e s s

		IP Address Settings
1 9 2 . 1 6 8 . 0 0 0 . 1 4 1			Press the ENTER key to enter Address Setting mode.
EXIT		ENTER	Press the ENTER key to enter Address Setting mode.
EXIT		MENU	See page 39 for the setting method.
			• Setting when DHCP is Off.
> > S u b n e t	M a s k	Subnet Mask Settings
	2 5 5 . 2 5 5 . 2 5 5 . 0 ENTER		Press the ENTER key to enter Address Setting mode.
EXIT		MENU	See page 39 for the setting method.
		MENU

			• Setting when DHCP is Off.

Continue on next page

37

Image 37

Ultra electronic Prima 3 user manual Network setting

Contents

Prima 2006/95/EC 89/336/EECRelating to electromagnetic compatibility Harmonized Standards Operation is subject to the following two conditions Information for USA Contents Manual any time as you need Do not touch the power plug during electrical stormsDo not use a line voltage other than instructed Do not wet the machine with water Pull out the power plug before cleaning the machine Do not use the machine while it has a faultHold the body of the power plug when pulling it out Do not touch the power plug with a wet hand Checking accessories Product featuresBefore use Handling of transfer film Ink ribbons and cards Escape Clause 35% to 70% InstallationTo 86 F Power input jack AccessoryNames of parts Front Slide knob Connecting the Laminator Connecting the IC unit Sold separatelySet-up Please ask your dealer for the Compact IC unit connection Install the unit connecting cable.optional Connecting the power cordPin Connecting cable Check the plug For AC 120V type Hang the stacker claw on the stacker receptacle Installing the card stackerCard stacker is capable of containing approximately Portion B See the description in Jam Transfer on p.50 Setting the ink ribbon Wind the ribbon, taking up the slack When the ink ribbon is wound up to the endClose the printer door Insert the cassette along the guide rail Insert the retransfer film into the cassette Setting the retransfer filmOtherwise the printer may fail Slowly Remove the retransfer film cassette Wind the retransfer film to take up the slack When the retransfer film is wound up to the endOpen the printer door and insert the cassette If the retransfer film is not set properly This 300 pieces is not a guaranteed quantity Setting cardsCassette and/or the ink ribbon cassette Shown in the illustration When moving the card bracket Dealer For a magnetic or IC card, encoding error may happenConsult your dealer to purchase new gloves For JIS II cards Printing on cards with magnetic strips is not guaranteedFor ISO cards See p.34 in this manual Connecting with USB cable Connecting with a host computerConnecting with Ethernet cable Connect the printer and host computer with the USB cable When connecting a host computer to multiple printers Connecting Multiple PrintersCopyright of the Software is displayed Names of parts on the operation panel Beforeuse LCD operation display content Operation display LED contents LCD panel Turn the power on Represents on and O represents OFF Turning on the powerOperation Operation display LED Ready LED will light up About the Reset button Turning off the powerIs loaded User modes User mode screen flowPress Submenu Main menu Submenu To the next Display mode settings Press to reset Reset the free counterClearing the free counter Exit user UV ink level setting Ink mode settingSet the K printing mode2 Special ink SP-Ink 2 level Retransfer mode setting Exit user mode Set the buzzer Buzzer mode setting Set the bend remedy roller temperature Setting the bend remedy modeBend remedy speed settings To select the setting value and press Coercivity setting mode Card Thickness setting mode IC contact setting modeNon-contact IC antenna setting mode Unit No. Setting Network setting Input method Address Setting mode Download mode setting Low temperature stand-by mode settingSet position of MAC address print Cleaning the cleaning rollers CareandcleaningOpen the card tray Remove the cleaning unit Close the card tray Cleaning the fan filter Cleaning the thermal headSee p.14, 16 in this manual Wipe the head indicated with Install the fan filters back to the original positions Cleaning the card feed rollers and heat RollersIf the sponge is removed, attach it again as shown below See p.31 in this manual Set a cleaning card Cleaning the magnetic headConfirm that the retransfer film cassette has been removed Once printer servicing and cleaning Have been completed Cleaning of the bobbin holdersPeriodical Maintenance Cleaning unit TroubleshootingAll rollers require routine cleaning Layout of rollers inside the printer To initialize the unit Error code listing Error Hardware errorMG connection error MG mechanical error About printing errors Stopping when printingWhen retransfer operation is not complete Mending broken ink ribbon Retransfer film Hopper jam Pull out the card tray Removing card jams Injury Retransfer section Jam transfer Main specifications Specifications Case of disposal External appearance and dimensionsFront view 34.3 38.1 Ultra Electronics Card Systems