Set-up, Connecting the Laminator | Ultra electronic Prima 3 instruction

Set-up

Connecting the IC unit

(sold separately)

Medium-type and compact size IC units are sold separately, as are specialized optional devices for the printer. Consult your dealer for more details.

WARNING

•Make sure that the power switch is turned OFF and the AC cable is detached from the plug, before connecting and disconnecting the IC units. Otherwise

Electric

shock electric shocks, fires or malfunction of the product may occur.

•Using IC units other than those specified may cause electric shocks, fires or malfunction of the product.

Medium-type IC unit and Compact IC unit (sold separately)

Please ask your dealer for the Compact IC unit connection.

Connect the compact IC unit to the host computer with the interface cables which are commercially available. The medium-type IC unit has various type of interface cable, according to installed IC unit. Consult your dealer for more details.

Medium-type IC unit and
Compact IC unit	Interface cable
	Interface cable
	(Commercial item)

(to the next page)

Connecting the Laminator

The laminator is sold separately, as a specialized optional device for the printer. Consult your dealer for more details.

WARNING

•Make sure that the power switch is turned OFF and the AC cable is detached from the plug, before connecting and

Electric	disconnecting the laminator. Otherwise
shock	electric shocks, fires or malfunction of the
	product may occur.

•Using laminator other than those specified may cause electric shocks, fires or malfunction of the product.

1.Set up the unit joint plate which comes with the laminator (optional). Mount the printer on to joint plate.

FRONT

X IDie	FRONT
printer
	Joint Plate

11

Image 11

Ultra electronic Prima 3 Set-up, Connecting the IC unit Sold separately, Connecting the Laminator, Product may occur

Contents

Prima Harmonized Standards 89/336/EEC2006/95/EC Relating to electromagnetic compatibility Operation is subject to the following two conditions Information for USA Contents Do not wet the machine with water Do not touch the power plug during electrical stormsManual any time as you need Do not use a line voltage other than instructed Do not touch the power plug with a wet hand Do not use the machine while it has a faultPull out the power plug before cleaning the machine Hold the body of the power plug when pulling it out Handling of transfer film Ink ribbons and cards Product featuresChecking accessories Before use Escape Clause To 86 F Installation35% to 70% Front Slide knob AccessoryPower input jack Names of parts Please ask your dealer for the Compact IC unit connection Connecting the IC unit Sold separatelyConnecting the Laminator Set-up Check the plug For AC 120V type Connecting the power cordInstall the unit connecting cable.optional Pin Connecting cable Portion B See the description in Jam Transfer on p.50 Installing the card stackerHang the stacker claw on the stacker receptacle Card stacker is capable of containing approximately Setting the ink ribbon Insert the cassette along the guide rail When the ink ribbon is wound up to the endWind the ribbon, taking up the slack Close the printer door Remove the retransfer film cassette Setting the retransfer filmInsert the retransfer film into the cassette Otherwise the printer may fail Slowly If the retransfer film is not set properly When the retransfer film is wound up to the endWind the retransfer film to take up the slack Open the printer door and insert the cassette Shown in the illustration Setting cardsThis 300 pieces is not a guaranteed quantity Cassette and/or the ink ribbon cassette Consult your dealer to purchase new gloves Dealer For a magnetic or IC card, encoding error may happenWhen moving the card bracket See p.34 in this manual Printing on cards with magnetic strips is not guaranteedFor JIS II cards For ISO cards Connect the printer and host computer with the USB cable Connecting with a host computerConnecting with USB cable Connecting with Ethernet cable Copyright of the Software is displayed Connecting Multiple PrintersWhen connecting a host computer to multiple printers Names of parts on the operation panel Beforeuse LCD operation display content Operation display LED contents LCD panel Operation display LED Ready LED will light up Turning on the powerTurn the power on Represents on and O represents OFF Operation Is loaded Turning off the powerAbout the Reset button Press User mode screen flowUser modes Submenu Main menu Submenu To the next Display mode settings Exit user Reset the free counterPress to reset Clearing the free counter Special ink SP-Ink 2 level Ink mode settingUV ink level setting Set the K printing mode2 Retransfer mode setting Exit user mode Set the buzzer Buzzer mode setting To select the setting value and press Setting the bend remedy modeSet the bend remedy roller temperature Bend remedy speed settings Unit No. Setting Card Thickness setting mode IC contact setting modeCoercivity setting mode Non-contact IC antenna setting mode Network setting Input method Address Setting mode Set position of MAC address print Low temperature stand-by mode settingDownload mode setting Close the card tray CareandcleaningCleaning the cleaning rollers Open the card tray Remove the cleaning unit Wipe the head indicated with Cleaning the thermal headCleaning the fan filter See p.14, 16 in this manual See p.31 in this manual Cleaning the card feed rollers and heat RollersInstall the fan filters back to the original positions If the sponge is removed, attach it again as shown below Confirm that the retransfer film cassette has been removed Cleaning the magnetic headSet a cleaning card Periodical Maintenance Cleaning of the bobbin holdersOnce printer servicing and cleaning Have been completed Layout of rollers inside the printer TroubleshootingCleaning unit All rollers require routine cleaning To initialize the unit Error code listing MG mechanical error Hardware errorError MG connection error Mending broken ink ribbon Retransfer film Stopping when printingAbout printing errors When retransfer operation is not complete Hopper jam Pull out the card tray Removing card jams Injury Retransfer section Jam transfer Main specifications Specifications 34.3 38.1 External appearance and dimensionsCase of disposal Front view Ultra Electronics Card Systems