Barco MFGD 2621, MFGD 3621 user manual To enable user controls, Settings menu

Display operation

4.Rotate the control wheel to select User Controls.

5.Press the control wheel to switch from “On” to “Off”.

6.Exit the menus.

To enable user controls:

1.Make sure the on-screen display is not on the screen.

2.Do not use the control wheel for at least 3 seconds.

3.Rotate the control wheel 1 step clockwise.

4.Press the control wheel 2 times.

5.Rotate the control wheel 1 step counterclockwise. The on-screen display appears.

Note: Steps 2 to 4 must be performed in maximum 3 seconds.

6.Rotate the control wheel to select Settings.

7.Press the control wheel to enter the Settings menu.

SETTINGS
DPMS	On
Power LED	On
User Controls	Off
EXIT

Figure 27: Settings menu

8.Rotate the control wheel to select User Controls.

9.Press the control wheel to switch from “Off” to “On”.

10.Exit the menus.

76