Light Kit (continued)
www.HunterFan.com 1.888.830.1326 
Install a bulb into each of the
sockets. When necessary, replace with bulbs of the same wattage.
Metal |
Plate |
Globe |
Globe |
Keeper |
Finial |
Cap |
Finial |
Press the globe and globe keeper flush
against the metal plate. Thread the
light pull chain through the hole in the center of the finial cap and thread the fan pull chain through the hole in the side of the cap. Finally, thread only the light pull chain through the hole in the finial and screw the finial onto the threaded rod.
| Fan |
Light | Pull |
Pull | Chain |
Chain |
|
Connect the appropriate pull
chain pendant to each of the short
chains coming from the finial and finial cap. The fan pull chain controls the speed: from high to off. The light pull chain controls the light fixture: on and off.
15
See next page for fan operation instructions.