Hunter Fan 53177, 53173, 53175, 53172, 53171, 53176 Light Kit, Switch housing with the upper switch

Page 14

Light Kit

www.HunterFan.com

1.888.830.1326

Switch

Housing

Screw

Partially install two of the switch housing

screws found in the bag. Connect the plugs from the upper and lower switch housings. Make sure to line up the colored markings on the connectors.

Notch

Switch

Housing

Screw

Align the notches in the sides of the lower

Install the third switch housing screw.

switch housing with the upper switch

Tighten all three screws securely.

housing screws. Lift the lower switch housing.

 

Twist the lower switch housing clockwise

 

to lock into place. Then thread the fan

 

pull chain through the hole in the light kit.

 

Want to install your fan without a light kit?

 

 

Make sure the lower switch housing is securely attached to

Go to www.HunterFan.com/FAQs and click

 

 

the upper switch housing. Failure to properly secure all three

“How do I install my fan without the light kit?”

 

 

 

switch housing screws could result in the light fixture falling.

 

14

 

 

 

 

 

 

 

 

M0094-01 • 02/19/14 • © Hunter Fan Company

Image 14
Contents Table of Contents ? ?What to Expect with Your Installation Tools Needed Mounting Options For angled ceilings, point Opening toward peak Ceiling BracketMake sure all four 4 bumpers Are still attached Preparation Downrod Hand Tighten Put the wires and downrod through FanWiring Canopy HolesBlades Switch Housing Feed the wire plug through the centerPull chain through the hole in the light kit Switch housing with the upper switchLight Kit Chain Install a bulb into eachKeeper Maintenance & Cleaning Customer serviceTroubleshooting Fan doesn’t work