Hunter Fan 53171, 53173, 53175, 53177, 53172, 53176 Maintenance & Cleaning, Customer service

Page 16

Maintenance & Cleaning

Metal

Plate

ON

Globe

Globe

Keeper

Finial

Cap

Finial

Changing the bulbs - unscrew the finial and remove it from the threaded rod. Remove the finial cap and unscrew the globe keeper while supporting the globe with your other hand. Carefully remove the globe. Unscrew bulbs and replace with bulbs of same type and wattage. Reinstall the globe assembly.

Reverse

Switch

Changing the direction of air flow - move the reverse switch to the opposite position.

www.HunterFan.com 1.888.830.1326

Cleaning the fan - use soft brushes or cloths to prevent scratching. Cleaning products may damage the finishes.

 

 

 

For questions regarding removing a light kit, call

 

16

 

customer service 1-888-830-1326.

 

 

 

 

M0094-01 • 02/19/14 • © Hunter Fan Company

Image 16
Contents Table of Contents ? ?What to Expect with Your Installation Tools Needed Mounting Options Make sure all four 4 bumpers Are still attached Ceiling BracketFor angled ceilings, point Opening toward peak Preparation Downrod Hand Tighten Put the wires and downrod through FanWiring Canopy HolesBlades Switch Housing Feed the wire plug through the centerLight Kit Switch housing with the upper switchPull chain through the hole in the light kit Keeper Install a bulb into eachChain Maintenance & Cleaning Customer serviceTroubleshooting Fan doesn’t work