1 • Installing the Light fixture on Fans With Removable Switch Housing (Continued)
7.Remove the wire connectors from the two wires in the switch housing labeled “Connect Light Here” or “For Light Use.”
To connect the wires, hold the bare metal leads together and place a wire connector over them, then twist the wire connector clockwise until tight.
Connect the black wire with a white stripe from the switch housing to the black wire from the light fixture. Connect the white wire from the switch housing to the white wire from the light fixture. Secure all wire connections using wire connectors.
CAUTION: Be sure no bare metal wires or wire strands are visible after making the connections.
8.Reconnect the
9.Reinstall screws to reattach the lower switch housing to the upper switch housing.
10.Go to the instructions for Installing Bulbs, and Shades.
Plug |
Connector |
Steps |
Lower Switch |
Housing |
Plug |
Connector |
Detail |
Wires
and Wire
connectors
Step 7
Housing
Assembly Screw
5