Hunter Fan installation manual 43553-01 05/15/09 Hunter Fan Company

Page 7

2 • Installing the Light fixture on Fans With Non-Removable Switch Housings Cont.

9.Attach the light fixture to the switch housing with the two screws included with the light fixture, aligning the holes in the light fixture, switch housing cover, and switch housing.

10.Securely tighten the two screws.

11.Go to the instructions for Installing the Bulbs and Shades.

Wires

and Wire

connectors

Steps 8-9

43553-01 • 05/15/09 • Hunter Fan Company

Image 7

Contents Four Light Fixture Motor housing of the ceiling fan Installing and operating your light fixtureYou with the best products available anywhere in the world Use only Hunter replacement partsPreparing the Light Fixture Threaded rod from the upper light housing Step Light fixture to fall Installation could cause43553-01 05/15/09 Hunter Fan Company Uninstall the two screws from the switch housing plate Installing the Light fixture on the Hunter OriginalsInstalling Bulbs and Shades Troubleshooting