2 • Installing the Light fixture on Fans With
1.Uninstall the two attachment screws from the switch housing cover.
2.Remove the plug or screw from the center of the switch housing cover.
3.Thread the switch housing cover onto the light fixture. Align the screw holes in the light fixture with the screw holes in the switch housing cover.
4.Use the two attachment screws removed from the lower switch housing and the lock washers on the red tag of the light fixture. Install the screws into the light fixture and the housing. Securely tighten the two screws.
5.Remove the wire connectors from the two wires in the switch housing labeled “Connect Light Here” or “For Light Use.” One wire is white and the other wire is black with a white stripe.
6.Feed the two wires from the switch housing through the threaded rod in the upper light housing.
7.To connect the wires, hold the bare metal leads together and place a wire connector over them, then twist the wire connector clockwise until tight.
Connect the black wire with a white stripe from the switch housing to the black wire from the light fixture. Connect the white wire from the switch housing to the white wire from the light fixture. Secure all wire connections using wire connectors.
8.Align the threaded screw holes in the switch housing cover with the threaded holes in the switch housing. Attach the switch housing cover and light fixture to the switch
housing using the included attachment screws.
CAUTION: Be sure no bare metal wires or wire strands are visible after making the connections.
WARNING: Improper | Wires |
installation could cause | and Wire |
the light fixture to fall. | connectors |
Housing
| Switch | |
| Housing | |
| Cover | |
| Attachment | |
Steps | Plug Screw | |
Switch | Nut | |
Housing | Washer | |
Cover | ||
|
Screw
AttachmentHole
Screw
Step 7
Light Fixture | Steps |
|
6