Hach 900 manual mA Interface and Pulse Duration Input, Splitter Interface

Section 3

Figure 6 4–20 mA Interface and Pulse Duration Input

(+)

(-) To Auxillary Connector

For details on programming the sampler for flow proportional operation, refer to SECTION.

Splitter Interface

This splitter interface (Cat. No. 939) can be used if access to more than one of the Auxiliary Receptacle functions is required simultaneously. Connecting the interface to the 6-pin connector on the sampler provides three additional connectors for use. Two or more interfaces may be connected in series to allow for as many connections as desired.

Figure 7 Splitter Interface

	Page 19
8544install.fm	Auxiliary Connection