English
1Blue Indicator Light
2
3Volume Control Button
4Charging Cradle
5MiniGel™
4
5 |
4 |
1
2 |
3 |
5.Unplug the AC adaptor from the charging cradle.
6.Remove the headset from the charging cradle. You are now ready to “pair” JABRA FreeSpeak 250 to your mobile phone. If the headset has already been paired to your phone, then you can begin using it.
WARNING: Do not attempt to charge JABRA FreeSpeak 250 with anything other than the AC adaptor provided. Using another AC adaptor may damage or destroy the headset.
1
English
STOP: BEFORE USING YOUR HEADSET
1 Check phone compatibility
The JABRA FreeSpeak 250 is compatible with most Bluetooth1 (see Glossary) phones that are compliant with Bluetooth version 1.1 or higher specification and support the headset and/or
JABRA also provides FreeSpeak versions for most
2 Charge JABRA FreeSpeak 250
JABRA FreeSpeak 250 uses a rechargeable battery that must be charged fully before you use the headset for the first time.
1.Fully insert the headset into the charging cradle.
2.Plug the JABRA FreeSpeak 250 AC adaptor into the headset’s charging cradle.
3.Plug the AC adaptor into the electrical outlet.
4.Charge your headset until the blue light on JABRA FreeSpeak 250 turns off. The unit will be fully charged in approximately 2 hours.
| 4 |
3 | 6 |
|
2
5
Fig. 1
IMPORTANT: The blue indicator light will be on while charging and will turn off when charging is complete. Removing the headset from the charging cradle while it’s charging will put the headset into standby mode and stop the charging sequence.
IMPORTANT: JABRA FreeSpeak 250 cannot be used while charging.
3 Read the glossary
Read the glossary at the end of this document to familiarize yourself with important terms used in this User Manual.
Once JABRA FreeSpeak 250 is fully charged, continue with these instructions.
4 | 5 |