2Attach the HUB's power cord to the power port on the rear of the HUB, and then plug the power cord into an electrical outlet.
3 The power ( |
| ) and the HUB ( | ) indicators on the HUB's front turn on. |
| |||
| |||
When the pairing indicator ( | ) begins to flash, plug the Link Mate(s) into an outlet. |
The pairing indicator on the Link Mate starts to flash.
If the HUB's pairing indicator does not flash, press the SPK ADD button on the rear of the HUB.
NOTE
99If you are adding multiple Link Mates, connect all the Link Mate's to electrical outlets. If you are not connecting all the Link Mates, refer to pages 35~41. Press here
4Wait until the pairing indicator on the Link Mate stops flashing. If the Link Mate's LED indicator turns solid blue, pairing is complete. The Link Mate may also beep.
NOTES
99Place each Link Mate at least 20 inches (50 cm) from the HUB when connecting them to the HUB. 99Your smart device cannot connect to the Link Mate or the HUB if there is no wireless router.
99To confirm you have a proper connection, check the pairing indicator on the front of the HUB.
The pairing indicator ( ) will blink for these 20 minutes or until pairing occurs. When you press the SPK ADD button to pair additional Link Mates, the pairing period is reduced to 10 minutes. The
pairing indicator ( ) flashes for 10 minutes or until pairing occurs. Turn on the Link Mate you want to pair while the pairing indicator is flashing.
99For a proper connection, connect the HUB to your router before turning on the Link Mate.
4444
14