|
|
|
Symptom | Check | Remedy |
HUB doesn't work properly | •• Is the HUB plugged in? | •• Plug in the HUB. |
| •• Is the LAN cable connected to | •• Connect the LAN cable to the |
| the wireless router and the HUB | ETHERNET SWITCH on the back |
| properly? | of the HUB and to your wireless |
| •• When the Hub is plugged in, do | router. |
| the HUB's front indicators show | •• Reset the HUB (see page 66). |
| it's operating properly? | Press here |
|
| •• If you experience troubles with |
|
| connecting the HUB and Link |
|
| Mate, try relocating the Link Mate |
|
| so that the Link Mate is closer to |
|
| the wireless router or HUB. |
Link Mate doesn't work properly | •• Is the Link Mate plugged in? | •• Plug in the Link Mate. |
| •• Does the Link Mate's top LED | •• Check whether the |
| indicator remain red 5 minutes | you're using had been certified for |
| after you turn it on? |
|
|
| •• Unplug the Link Mate, plug it back |
|
| in, and then reconnect it to the |
|
| router. |
|
| •• Reset the Link Mate (see page |
|
| 66). Press here |
|
| •• If used with a HUB |
|
| |
|
| the HUB are connected to the |
|
| same |
|
| |
|
| LED's show that it is working |
|
| correctly. (See page 14, item 3.) |
|
| Press here |
|
| |
|
| HUB (see page 66). Press here |
|
| |
|
| Then, unplug and plug in the |
|
| Link Mate. |
|
| |
|
| connecting the HUB and Link |
|
| Mate, try relocating the Link |
|
| Mate so that the Link Mate is |
|
| closer to the wireless router or |
|
| HUB. |
| 4444 |
|
| 69 |
|