![](/images/new-backgrounds/1216492/21649279x1.webp)
❚❚ Adding another Link Mate and Hub to a single Link Mate in use
`` When the Link Mate in use is connected to the router with a LAN cable
1Disconnect the LAN cable from the Link Mate in use.
2Connect the HUB to the wireless router with the LAN cable, and then plug in the HUB's power cable.
3Plug in the power cable of the new Link Mate. The new Link Mate's blue LED pairing indicator starts to flash. Wait until the pairing indicator on the Link Mate stops flashing. When the indicator stops flashing, pairing is complete. The Link Mate may also beep.
4Turn off the old Link Mate by disconnecting the power cable. Then. connect it again. Press the DEVICE ADD button on the back of the Link Mate. The Link Mate's blue LED pairing indicator starts to flash. Wait until the pairing indicator on the Link Mate stops flashing. When the indicator stops flashing, pairing is complete. The Link Mate may also beep.
5On your smart device, select the Samsung Multiroom app. Setup starts.
4444
40