AAAdding a HUB
A Link Mate and a HUB may not pair successfully if the Link Mate and HUB are too far apart or are on different floors.
In such cases, you can link two HUBs together by setting the second HUB to Repeater mode. The additional HUB amplifies the signal and lets you pair the Link Mate to the closest HUB.
1Set the HUB that is connected to the wireless router to Pairing mode by pressing its SPK ADD button for 1 second.
2Plug in the new HUB you are using as an extender, and then press its SPK ADD button for 10 seconds.
3The newly added HUB's LED indicators turn off and on, and it switches to Repeater mode.
4Once the connection between the two HUBs has been
established, the added HUB's ( 
) indicator stops blinking.
NOTES
Link Mate
Used as a 
extender 
99If your smart device is not connected to the wireless router with a
Samsung Multiroom app.
99Place the HUB that is in Repeater mode in an appropriate
location between the Link Mate and the HUB that is connected to the wireless 99You can set only one HUB to Repeater mode.
HUB
router.
AARelocating the Link Mate
When relocating your Link Mate, refer to the below table.
|
|
|
Wireless router | If you want to connect your Link Mate | If you want to connect your Link Mate |
HUB | to the current wireless router. | to a different wireless router. |
|
| Turn off the Link Mate, relocate it, then |
Without a HUB |
| establish the new connection as described |
| Turn off the Link Mate, relocate it and | in the installation instructions on pages 13 |
| through 34. Press here | |
| then turn it on. |
|
| Connect a LAN cable between the HUB | |
With a HUB |
| and the new wireless router, turn on the |
|
| HUB, and then turn on the Link Mate. |
4444
42