Samsung DVD-R4000EU manual Connections without Scart leads

Connections (without Scart leads)

If you do not have any scart leads and your TV is not Q Link type, you can connect your DVD Recorder to a TV and Satellite Receiver using RF leads.

Using this connection method may however be difficult to obtain a clear picture from the Satellite Receiver. For this reason it is not recommended for inexperienced users.

(See preferred connection on page 12.)

Satellite Receiver (not supplied)	Aerial Input socket
		Aerial	1
		(not supplied)
	Aerial Output socket	RF lead	2
To AC Mains socket 4		(not supplied)
	RF Input socket	TV (not supplied)

R - AUDIO - L	VIDEO S-VIDEO
OPTICAL	OUT

AC Input socket	(PCM/BIT STREAM)	R - AUDIO - L	VIDEO S-VIDEO	AV4IN
	DIGITAL AUDIO OUT

AC Mains lead (supplied) 4

	RF IN	Aerial Input
AV1 (TV)
AV2 (DECODER/EXT)	RF OUT	socket

RF Output socket

RF lead (supplied) 3 ≥Must be connected to watch TV channels.

To AC Mains socket 4

1Connect the aerial to the aerial input socket of the Satellite Receiver.

≥If you do not have a Satellite Receiver, connect the aerial to the RF Input socket of the DVD Recorder and go to step 3.

Satellite Receiver

Note

≥If you have an analogue satellite receiver, select [SKY ONE] or [SKY NEWS] on the receiver before starting Auto Setup.

After Auto Setup is complete, the satellite position will be shown as [SAT] in the channel listing to denote programmes from the satellite receiver.

≥If you have a digital satellite receiver, you can start Auto Setup with the receiver set to any channel.

We recommend to manually name the [SAT] position after Auto Setup is complete. (See page 64.)

2Connect the aerial from Satellite Receiver to the RF Input socket.

Satellite Receiver

RF IN

This unit

3Connect the RF Output socket to the TV aerial socket.

RF OUT

TV

This unit

4Plug the TV, DVD Recorder and Satellite Receiver into the mains as shown at top of the page.

13