Samsung DVD-R4000EU manual Displays, For your safety, Disposal of old equipment, Inside of unit

Page 6

Warning and Important Information

CAUTION!

THIS PRODUCT UTILIZES A LASER.

USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.

WARNING:

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT DAMAGE, DO NOT EXPOSE THIS EQUIPMENT TO RAIN, MOISTURE, DRIPPING OR SPLASHING AND ENSURE THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE EQUIPMENT.

As this equipment gets hot during use, operate it in a well ventilated place;

do not install this equipment in a confined space such as a book case or similar unit.

Important

Your attention is drawn to the fact that the recording of pre-recorded tapes or discs or other published or broadcast material may infringe copyright laws.

For your safety

Do not remove outer cover.

Touching internal parts of the unit is dangerous, and may seriously damage it.

To prevent electric shock, do not remove cover. There are no user serviceable parts inside. Refer all servicing to qualified service personnel.

For your safety, be sure not to connect or handle the equipment with wet hands.

Disposal of old equipment

Batteries, packaging and old equipment should not be disposed of as domestic waste, but in accordance with the applicable regulations.

Cautions before you operate this unit Do not place in an enclosed area so that the rear

cooling fan and the cooling vents on the side are covered up.

Avoid:

Humidity and dust.

Extreme heat such as direct sunlight. Magnets or electromagnetic objects. Touching internal parts of the unit.

Water or some other liquid.

Lightning. (Disconnect the aerial plug from the unit during lightning storms.)

Anything heavy on the unit.

Connecting or handling the equipment with wet hands.

Using a cell phone near the unit because doing so may cause noise to adversely affect the picture and sound.

Do:

Wipe the unit with a clean and dry cloth.

Install the unit in a horizontal position.

Keep the unit, TV and other equipment switched off until you have finished all connections.

VIDEO Plus+ and PlusCode are registered trademarks of Gemstar Development Corporation.

The VIDEO Plus+ system is manufactured under license from Gemstar Development Corporation.

MPEG Layer-3 audio decoding technology licensed from Fraunhofer IIS and Thomson multimedia.

Notes on these instructions

These operating instructions describe operations mainly using the remote control. If the name of the button is the same, the operation described can also be performed with the main unit.

The contents of the screens used in these instructions may not necessarily match what you will see on your screen.

Displays

The displays shown in these instructions are examples only. Actual displays depends on the disc being played.

Manufactured under license from Dolby Laboratories.

“Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby Laboratories.

“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.

LUOKAN 1 LASERLAITE

KLASS 1 LASER APPARAT

 

 

 

 

 

RF IN

OPTICAL

R - AUDIO - L

VIDEO

S-VIDEO

OUT

AV1 (TV)

 

 

 

 

DIGITAL AUDIO OUT

 

 

 

AV4

RF OUT

(PCM/BIT STREAM)

R - AUDIO - L

VIDEO

S-VIDEO

 

 

Inside of unit

DANGER

VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN.

 

AVOID DIRECT EXPOSURE TO BEAM.

(FDA 21 CFR)

CAUTION

VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN.

 

AVOID EXPOSURE TO BEAM.

(IEC60825-1)

ATTENTION

RAYONNEMENT LASER VISIBLE ET INVISIBLE EN CAS D’OUVERTURE.

 

EXPOSITION DANGEREUSE AU FAISCEAU.

 

ADVARSEL

SYNLIG OG USYNLIG LASERSTRÅLING VED ÅBNING.

 

 

UNDGÅ UDSÆTTELSE FOR STRÅLING.

 

VARO!

AVATTAESSA OLET ALTTIINA NÄKYMÄTÖN

 

 

LASERSÄTEILYLLE. ÄLÄ KATSO SÄTEESEEN.

 

VARNING

SYNLIG OCH OSYNLIG LASERSTRÅLNING NÄR DENNA DEL

 

ÄR ÖPPNAD. BETRAKTA EJ STRÅLEN.

 

ADVARSEL

SYNLIG OG USYNLIG LASERSTRÅLING NÅR DEKSEL ÅPNES.

 

UNNGÅ EKSPONERING FOR STRÅLEN.

 

VORSICHT

SICHTBARE UND UNSICHTBARE LASERSTRAHLUNG, WENN ABDECKUNG

 

GEÖFFNET. NICHT DEM STRAHL AUSSETZEN.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

RQLS0233

6

Image 6
Contents DVD Video Recorder Contents Functionsreturn Main unit Remote controlControl reference guide Entering titlesUnit’s display Control reference guideDisposal of old equipment For your safetyDisplays Inside of unitCheck that you have the accessories shown Checking the AccessoriesHow to replace the Fuse Dear CustomerBatteries Remote controlRemote control signal sensor Switch DVD, TV 15 to DVD UsePreparation Remote controlTelevision operation Operation ButtonDiscs you can use for recording and play DiscsDiscs you can use Play-only discsTypes of disc for the type of connected Discs that cannot be playedAudio format logos DiscsPin Scart leads are not supplied Connections with Scart leadsFollow the step-by-step guide below HintConnections without Scart leads Connect the RF Output socket to the TV aerial socketConnections with S-Video cable Recording RGB Signals Standby to ensure continuous output of RGB signalsSignals from the Sky Digital STB Clock. This is called Auto Setup function Auto Setup with Q Link FunctionsTo Set Up this DVD Recorder with a brand-new Q Link TV Menu for Owner ID settingAuto Setup with Q Link Functions Auto Setup without Q Link FunctionsTo Set Up this DVD Recorder with an existing Q Link TV To restart Auto SetupRemoving Interference Auto Setup without Q Link FunctionsVideo Plus+ Codes for Satellite Receivers/Cable TV For the United KingdomTo return to the previous screen Selecting TV screen typeUse 3, 4 10 to select the TV aspect and press Enter ≥169When a menu screen appears on the television Playing discsErasing a programme that is being played Slow-motion play Starting play from where you stopped it Resume FunctionFast forward and rewind-SEARCH Frame-by-frame viewingSkipping Manual SkipSelecting an amount of time to skip Time Slip When using DVD-R Changing audioUsing Display menus to mark positions Marking places to play again MarkerMarking positions directly Using menus to play MP3 discs Using the tree screen to find a groupRecording television programmes Stop recording EXT Link To perform Direct TV RecordingTo stop play and recording Playing while you are recordingSimultaneous recording and play Press Direct NavigatorChecking the recording during recording Time Slip Using the Functions windowUsing the Functions window Watching the television while recordingUsing the Functions window Functions window iconsPress Video Plus+ 2 button Timer recordingUsing Video Plus+ number to make timer recording Press the numeric buttons 4 to enter the Video Plus+ numberTimer recording To change the programmeTo change the timer recording programme Manual programmingTo put the unit on recording standby To put the unit on recording standby Press , Timer Starting and canceling programmesTo clear a timer recording programme To check programmesTo select the TV system PAL/NTSC When connected to the other equipmentRecording from a video cassette player Use 3, 4 10 to select the TV system and press EnterEntering titles Enter TitleAbout Disc Information Disc Protection Releasing disc protectionDisc Information Erase all programmes FormatFinalize Creating DVD-Video Use 3, 4 10 to select Finalize and press EnterTo stop finalizing To clear the programme list Using the Direct NavigatorSelecting programmes to play About the programme listChecking programme contents Erasing programmesEntering and editing programme titles Padlock mark appears Protecting programmesReleasing programme protection Select No in and press Enter Press ReturnTo erase another part of the same programme Erasing parts of a programmeDividing programmes To change the point to divideUsing Play List to edit programmes Displaying Play ListAbout the Play List Scene screen Using Play List to edit programmes Creating Play ListPlaying Play List Playing ScenesTo erase a Play List or a Play List Scene during play Adding Scenes to a Play List Moving a SceneTo re-edit a Play List Scene Erasing a Scene from a Play ListErasing a Play List Checking Play LIST’s contentsCopying Play List Titling Play ListUsing Display menus Common proceduresDisc menu Picture menu Using Display menusPlay menu Sound menuDisplay changes as illustrated Repeat playUse 3, 4 PRG PROGRAMME,-.All,-.OFFEnjoying more powerful sound Connecting external equipmentTo cancel the Child Lock Child LockConnecting external equipments Connecting a digital amplifier or system component aConnecting an analog amplifier or system component B To enjoy Dolby Pro LogicConnecting a Decoder Connecting a satellite receiver or digital receiverYellow Video White L Red R Connecting a video cassette recorderAudio/Video cable Rear panel of this unitChanging the unit’s settings ≥Switch DVD, TV 15 to DVDPress Functions Settings Summary of settingsTuning Changing the unit’s settingsPicture SoundDisplay ConnectionEntering a password Ratings Digital outputClock Settings Manual Clock SettingChanging the unit’s settings Auto Clock Setting Handling the Tuning BOX screen Channel SettingsSelecting the manual tuning NicamAuto-Setup Restart, Download Changing the Owner ID Shipping ConditionDisplay examples Status displaysChanging the information displayed Press Status 28 to change the information displayedMaintenance and Handling MaintenanceDisc handling Glossary Title/Chapter DVD-Video GlossaryLink TrackSelf-diagnosis Service Unit status Solutions NumberRecover No ReadError displays Error messages Causes and solutionsInformation Picture Troubleshooting guidePower SoundRemote control doesn’t work Cannot operate the television Troubleshooting guideRemote control PlayRecording and timer recording Specifications Disc 10, 20, 26 Index16, 17 Dolby Digital 11, 54, 62Page Page F0103Fa0
Related manuals
Manual 64 pages 60.91 Kb