Samsung DVD-R4000EU manual Connecting a digital amplifier or system component a

Connecting a digital amplifier or system component [A]

(1)

R - AUDIO - L

OPTICAL

AUDIO OUT

STREAM) R - AUDIO - L

(2)

(3)

(4)

(5)

(6)

(1)Rear of this unit

(2)Insert fully, with this side facing up. (Do not bend when connecting.)

(3)Optical digital audio cable (not supplied)

(4)To optical digital input

(5)Amplifier or

system component (with or without decoders) (not supplied)

(6)Speakers (not supplied) ≥Example: 6 speakers

For your reference

≥Change the settings in the “Sound” menus (page 60) to suit the digital equipment you have connected. If the equipment can decode Dolby Digital, set “Dolby Digital” to “Bitstream” (factory setting). If the equipment can decode DTS, set “DTS” to “Bitstream”.

≥The DTS decoder must be compatible with the signals recorded on DVD.

You can record the digital signal directly onto digital recording equipment.

The signals on DVDs will be converted to 48 kHz/16 bit linear PCM.

When recording DVDs, ensure the following conditions are met. ≥There is no copy guard recorded on the disc.

≥The recording equipment can handle a sampling frequency of 48 kHz/16 bit.

≥You cannot record MP3.

If you want to use the synchro recording feature on your digital recording equipment and you use connection [A] or [B] to record from CDs or video CDs, first pause at the point you want to record from, activate the synchro feature, then restart play on the unit.

Connecting external equipments (continued)

Connecting an analog amplifier or system component [B]

(1)

a) b)

(2)

(3)

	R - AUDIO - L	VIDEO	S-VIDEO	OUT
OPTICAL
DIGITAL AUDIO OUT	R - AUDIO - L	VIDEO	S-VIDEO	AV4 IN
(PCM/BIT STREAM)

(4)

(5)

(6)

(1)Audio cable a) Red (R) b)White (L)

(2)Rear panel of this unit

(3)To AUDIO OUT (L/R)

(4)Audio cable (not supplied)

(5)Audio input (L/R)

(6)2-channel analog amplifier or system component (not supplied)

ªTo enjoy Dolby Pro Logic (page 69)

You will also need to connect center and surround speakers in addition to the front speakers to enjoy surround sound. Read the instructions for the equipment for connection details. Turn V.S.S. off. Dolby Pro Logic will not function correctly if V.S.S. is on.

55