Samsung BD-H5900/EN manual Appendix, Using the Tools Menu, Playing Photo Contents, Troubleshooting

5.Repeat Step 4 to select and check additional desired item.

6.To remove the desired item from the list, press the YELLOW (C) button again.

The check on the desired item is removed.

7.When done, press the TOOLS button, and then select the Copy to USB using the ▲▼ buttons, and then press the v button. The Copy to USB pop-up appears.

8.Use the ▲▼ buttons to select the device to store the copied files to, and then press the v button.

✎NOTES✎

`` Do not disconnect the device while copying is in progress.

9.If you want to cancel copying, press the v button and then select Yes. Select No to continue copying.

10.When ripping is complete, the "Copying is completed." message appears. Press the v button to go back to the Playback screen.

✎NOTES✎

`` This function may not be supported by some discs.

`` On the Copying screen, you can also choose Select All and Deselect All.

--Use Select All to select all tracks. This cancels your individual track selections.

--Use Deselect All to deselect all selected tracks at once.

Playing Photo Contents

You can control the playback of photo content located on a Blu-ray disc, DVD, CD, USB device, or your computer.

Using the Tools Menu

During playback, press the TOOLS button.

Start Slide Show/	Select to start or stop the slide
Stop Slide Show	show.
Slide Show Speed	Select to set a slide show's speed.
Background	Select to listen to music while
Music	viewing a slide show.
Zoom	Select to enlarge the current
	picture. (Enlarge up to 4 times)
Rotate	Select to rotate the picture. (This
	will rotate the picture either
	clockwise or counter clockwise.)
Information	Shows the picture information.

✎✎ NOTES

`` Depending on the disc or storage device, the Tools menu may differ.

`` To enable the background music function, the photo file must be in the same storage media as the music file.

However, the sound quality can be affected by the bit rate of the MP3 file, the size of the photo, and the encoding method.

`` You can't enlarge the subtitle and PG graphic in the full screen mode.

Appendix

	Troubleshooting
Before requesting service, please try the following solutions.
PROBLEM	SOLUTION
No operation can be	• Check the batteries in the remote control. They may need replacing.
performed with the remote	• Operate the remote control at a distance of no more than 6.1m from the
control.	player.
	• Remove batteries and hold down one or more buttons for several minutes
	to drain the microprocessor inside the remote control to reset it. Reinstall
	batteries and try to operate the remote control again.
Disc does not play.	• Ensure that the disc is installed with the label side facing up.
	• Check the region number of the Blu-ray Disc/DVD.
Disc Menu does not appear.	• Ensure that the disc has disc menus.
The prohibition message	• This message appears when an invalid button is pressed.
appears on the screen.	• The Blu-ray Disc/DVD’s software doesn’t support the feature (e.g., angles).
	• You’ve requested a title or chapter number or search time that is out of range.
Play mode differs from the	• Some of the functions selected in the Setup Menu may not work properly if
Setup Menu selection.	the disc is not encoded with the corresponding function.
The screen ratio cannot be	• The Screen Ratio is fixed on your Blu-ray Disc/DVD.
changed.	• This is not a problem with the player.
No audio.	• Make sure you have selected the correct Digital Output in the Audio Options
	Menu.
The screen is blank.	• If the HDMI output is set to a resolution your TV cannot support (for example,
	1080p), you may not see a picture on your TV.
	• Press the @ button (on top panel) for more than 5 seconds with no disc
	inside. All settings will revert to the factory settings.
	• When the factory default settings are restored, all stored user BD data is
	deleted.

21