Samsung LH49PMFPBGC/EN manual External connection, Checkpoints, Cable Connection,  RS232C Cable

Page 20

Chapter 2. Device setup

External connection

Checkpoints

Before connecting a source device, read the user manual provided with it. The number and locations of ports on source devices may differ from device to device.

Connect the sound ports correctly: left = white and right = red.

Check the types of ports at the back of the product you want to connect. The appearance may differ depending on the product.

WARNING

Do not connect the power cable until all connections are completed. Connecting the power cable during connection may damage the product.

Cable Connection

RS232C Cable

Interface

RS232C (9 pins)

 

 

Pin

TxD (No.2), RxD (No.3), GND (No.5)

 

 

Bit rate

9600 bps

 

 

Data bits

8 bit

 

 

Parity

None

 

 

Stop bit

1 bit

 

 

Flow control

None

 

 

Maximum length

15 m (only shielded type)

 

 

Pin assignment

1 2 3 4 5

6 7 8 9

Pin Signal

1Detect data carrier

2Received data

3Transmitted data

4Prepare data terminal

5Signal ground

6Prepare data set

7Send request

8Clear to send

9Ring indicator

RS232C cable

• Connector: 9-Pin D-Sub to Stereo Cable

61

9-P1- 5

20

3

2

1

-P2-

Image 20
Contents Page Table of contents Troubleshooting Copyright SymbolsAbout this manual Electricity and safety SafetySafety precautions Installation Children may suffocateOperation Children may become injured or seriously harmedStorage Product may fall and become damaged or cause an injuryCleaning Precautions when handling the panelWhat’s Included Device setupInstallation Parts Panel keyRemote sensor and spacer logo optional Remote sensorReverse side Spacer logo optionalAnti-theft lock To lock an anti-theft locking devicePort Description RJ45Plug In Module Sold separately PIM slotRemote control VOLTo place batteries in the remote control Guided installation Installation on a perpendicularwallInstallation on an indented wall VentilationWall mount installation Preparing before installing wall mountInstalling the wall mount Wall mount kit specifications VesaUnit mm PM55F / PH55FExternal connection CheckpointsCable Connection  RS232C CableCross LAN cable PC to PC LAN CableDirect LAN cable PC to HUB Viewing control state Get control command Controlling Set control commandControl Codes ConnectionCommand Power controlVolume control Input source controlScreen mode control Setting the input source Set Input SourceViewing screen status Get Screen Mode Status Setting the picture size Set Picture SizeScreen size control PIP On/Off controlViewing the screen size Get Screen Size Status Viewing PIP on/off state Get the PIP ON/OFF StatusAuto adjustment control PC and BNC only Video Wall Mode ControlSafety Lock Setting the video wall Set Video Wall ModeViewing the safety lock state Get Safety Lock Status Full NaturalVideo Wall On Video Wall User Control10x10 Video Wall Model 1 ~ Set Number Data 0x01 0x02 0x63 100 0x64PC connection Connection using a DVI cable Digital typeConnection using a D-SUB cable Analog type  System → General → set Hdmi Hot Plug to Off Connection using an HDMI-DVI cable Sound → set Hdmi Sound to Pcdvi Precautions for using DP Connection using an Hdmi cableConnection using an DP cable AV connection ‒‒ Sound → set Hdmi Sound to AvhdmiConnection using an Hdmi cable up to 1080p Audio system connectionLAN connection Source selectionSource EditPC software Multiple Display Control Installation/uninstallationUninstallation Using the RS-232C cable Using the ethernet cableConnection using a direct LAN cable ConnectionConnection using a cross LAN cable Viewing content Home screenPlayer Home → Player →When content is running File formats compatible with PlayerControl buttons on the remote Available menuTemplate files and LFD.lfd files RestrictionsContents Power Point VideoAudio ImageTemplate files Supported in Network Channel and Local ChannelURL Launcher Setting ScheduleURL Launcher Clone ProductID Settings Device IDDevice ID Auto Set PC Connection CableVideo Wall Video WallNetwork Status On Timer Picture ModeOn/Off Timer Off Timer TickerHome → Ticker →  Off / OnApproving a connected device from the server Setting the current time Select Edit  Setup Select Time ZoneScreen adjustment 2nd 3rd Picture ModeMenu PictureWhen this setting is on, only UHD products are supported Film Mode Auto AdjustmentImage Reset Hdmi Black LevelReset Picture Picture OffOnScreen display adjustment TimerOnScreen Display Immediate display2nd 3rd Description Language Set the menu language Sound adjustment If Sound Output is set to External, Auto Volume is disabledSound Audio receiver. If this occurs, set the product to ExternalNetwork NetworkNetwork Network Settings Wired Connecting to a Wired NetworkAutomatic Network Settings Wired Manual Network Settings WiredHow to set up automatically How to set up manuallyAutomatic Network Setup Wireless Network Setting WirelessConnecting to a Wireless Network Select Add Network Manual Network Setup WirelessHow to set up using Wpspbc System SystemPower Control Auto Power On Message to OnPower Button Eco Solution Energy Saving ModeNo Signal Power Off Auto Power OffSecurity Safety Lock Change PINButton Lock USB Auto Play LockGame Mode Reset SystemCustom Logo Logo Display TimeTroubleshooting forAnynet+ Anynet+ HDMI-CECAnynet+ HDMI-CEC System menuProblem Possible Solution Anynet+ device Support SupportTroubleshooting Screen ResolutionBefore you contact us Diagnosis Not Optimum Mode is displayed Installation issue PC modeScreen issue Adjust Brightness and Contrast Sound issue Go to Sound and change Sound Output to InternalOther issue Remote control issueSource device issue Defined resolution is not supported. appears Frequently asked questions Question Answer How can I change the frequency?General SpecificationsAppendix Plug-and-Play MAC, 832 x Standard signal mode tableMAC, 640 x VESA, 640 x VESA, 800 xVESA, 1024 x VESA, 1152 xOthers Product damage caused by customer’s faultNot a product defect What is afterimage burn-in? Optimum picture quality and afterimage burn-in preventionOptimum picture quality Prevention of afterimage burn-inPreventing afterimage burn-in OZ348 2030 UA102 2110License Open Source Licence Notice
Related manuals
Manual 85 pages 27.41 Kb Manual 2 pages 16.4 Kb Manual 2 pages 18.27 Kb Manual 106 pages 12.52 Kb Manual 88 pages 23.61 Kb Manual 106 pages 22.27 Kb Manual 106 pages 58.74 Kb Manual 87 pages 10.83 Kb Manual 106 pages 7.27 Kb Manual 2 pages 14.49 Kb Manual 89 pages 12.2 Kb Manual 90 pages 42.67 Kb Manual 90 pages 39.46 Kb Manual 91 pages 40.68 Kb Manual 89 pages 59.02 Kb Manual 90 pages 36.39 Kb Manual 87 pages 7.51 Kb Manual 88 pages 4.1 Kb Manual 87 pages 6.28 Kb Manual 87 pages 12.52 Kb Manual 88 pages 55.71 Kb Manual 88 pages 2.02 Kb Manual 88 pages 27.14 Kb Manual 91 pages 18.79 Kb Manual 88 pages 24.84 Kb Manual 2 pages 16.45 Kb Manual 87 pages 34.06 Kb Manual 84 pages 39.01 Kb

LH49PMFPBGC/CH, LH32PMFPBGC/EN, LH43PHFPMGC/EN, LH55PHFPBGC/CH, LH32PMFPBGC/CH specifications

Samsung's line of professional display solutions, particularly the LH49PHFPBGC/UE, LH43PMFPBGC/EN, LH49PHFPBGC/NG, LH43PMFPBGC/EN, and LH49PMFPBGC/EN models, exemplifies the company's commitment to innovation and quality in digital signage technology. These models are designed to meet the diverse needs of businesses and organizations, providing exceptional visual performance, durability, and versatility.

A standout feature of these displays is their remarkable picture quality, characterized by vibrant colors and sharp images that enhance the viewer's experience. This is achieved through Samsung's advanced LED technology, which ensures high brightness and contrast ratios. Additionally, the displays support 4K resolution, delivering stunning detail that is essential for capturing audience attention in retail environments, corporate settings, or public spaces.

The series also incorporates HDR (High Dynamic Range) capabilities, allowing for a broader range of colors and luminance levels. This feature is particularly beneficial for content that requires precision and depth, enabling businesses to showcase their products or services in the best possible light. Furthermore, with a high refresh rate, these displays minimize lag, ensuring smooth transitions and motion, which is critical in dynamic content presentation.

Durability is a crucial aspect of these professional displays. Designed for 24/7 operation, they can withstand the rigors of continuous use without compromising performance. The robust build is complemented by a sleek, modern design that fits seamlessly into various environments, from retail stores to conference rooms.

Connectivity options are extensive, making it easy to integrate these displays into existing systems. With multiple HDMI and USB ports, users can easily connect various devices, enhancing flexibility in content management and delivery. Built-in Wi-Fi capabilities further facilitate wireless content sharing, enabling users to update and control displays remotely.

The intuitive user interface simplifies content management, allowing for quick and efficient scheduling and playback of media. This is particularly advantageous for businesses that require regular updates to their displays.

In summary, the Samsung LH49PHFPBGC/UE, LH43PMFPBGC/EN, LH49PHFPBGC/NG, LH43PMFPBGC/EN, and LH49PMFPBGC/EN models stand out in the digital signage market due to their breathtaking visuals, robust performance, and user-friendly features. These displays are engineered to deliver exceptional results, making them an excellent choice for any business looking to enhance its communication and engagement strategies. Whether it’s for advertising, information dissemination, or immersive experiences, Samsung’s professional displays are a reliable and high-quality solution.