![](/images/new-backgrounds/1177503/17750397x1.webp)
Chapter 4. Home screen
Picture Mode
HOME → Picture Mode → ![](/images/new-backgrounds/1177503/17750397xi2.webp)
Select a picture mode (Picture Mode) suitable for the environment where the product will be used.
Video/Image mode improves the picture quality of the video device. Text mode improves the picture quality of the computer.
•Shop & Mall
Suitable for shopping malls.
‒‒ Select either Video/Image or Text depending on the picture mode.
•Office & School
Suitable for offices and schools.
‒‒ Select either Video/Image or Text depending on the picture mode.
•Terminal & Station
Suitable for bus terminals and train stations.
‒‒ Select either Video/Image or Text depending on the picture mode.
•Video Wall
Suitable for environments where video wall display are used.
‒‒ Select either Video/Image or Text depending on the picture mode.
•Calibration
In this mode, the brightness, colour and gamma settings customized using the colour calibration programme Advanced Colour Management are applied.
‒‒ To apply the Calibration mode properly, make sure you configure the picture quality settings, such as brightness, colour and gamma, using the colour calibration programme Advanced Colour Management.
‒‒ To download the Advanced Colour Management programme, visit www.samsung. com/displaysolutions.
49
On/Off Timer
HOME → On/Off Timer →
You must set Clock before you can use this feature.
On Timer
Set On Timer so that your product turns on automatically at a time and on a day of your choosing.
The power is turned on with the specified volume or input source.
Set the on timer by making a selection from one of the seven options. Ensure you set the current time first. (On Timer1 ~ On Timer 7)
• Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual.
If you select Manual, you can choose the days you want On Timer to turn on your product.
‒‒ The check mark indicates days you’ve selected.
• Time: Set the hour and minute. Use the number buttons or ▲/▼ buttons to enter numbers. Use ◀/▶ buttons to change entry fields.
• Volume: Set the desired volume level. Use the up and down arrow buttons to change the volume level.
• Source: Select the input source of your choice.
• Content: Select specific content within the internal or external memory. Content is only available when source is set to Internal/USB.