Samsung LH43PHFPBGC/EN, LH49PMFPBGC/EN manual Standard signal mode table, MAC, 640 x, MAC, 832 x

Page 83

Chapter 7. Appendix

83

Standard signal mode table

This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel. Using a resolution other than the specified resolution may degrade the picture quality. To avoid this, it is recommended that you select the optimum resolution specified for your product.

Check the frequency when you exchange a CDT product (connected to a PC) for an LCD product. If the LCD product does not support 85 Hz, change the vertical frequency to 60 Hz using the CDT product before you exchange it with the LCD product.

Model Name

 

 PM32F / PM43F / PM49F / PM55F

 

 

PH43F / PH49F / PH55F / PH43F-P / PH49F-P / PH55F-P

Synchronization

Horizontal frequency

30

- 80 kHz

 

 

 

 

 

Vertical frequency

60

- 75 Hz

 

 

 

Resolution

Optimum resolution

1920 x 1080 @ 60 Hz

 

 

 

 

Maximum resolution

1920 x 1080 @ 60 Hz

 

 

 

 

Horizontal frequency

The time required to scan a single line from the left to the right side of the screen is called a horizontal cycle. The reciprocal number of a horizontal cycle is called horizontal frequency. Horizontal frequency is measured in kHz.

Vertical frequency

The product displays a single image multiple times per second (like a fluorescent light) to display what the viewer sees. The rate of a single image being displayed repeatedly per second is called vertical frequency or refresh rate. Vertical frequency is measured in Hz.

The screen will automatically be adjusted if a signal that belongs to the following standard signal modes is transmitted from your PC. If the signal transmitted from the PC does not belong to the standard signal modes, the screen may be blank with the power LED on. In such a case, change the settings according to the following table by referring to the graphics card user manual.

Resolution

Horizontal Frequency (kHz)

Vertical Frequency (Hz)

Pixel Clock (MHz)

Sync Polarity

 

 

 

 

 

H

V

IBM, 720 x 400

31.469

70.087

28.322

+

 

 

 

 

 

 

MAC, 640 x 480

35.000

66.667

30.240

 

 

 

 

 

 

MAC, 832 x 624

49.726

74.551

57.284

 

 

 

 

 

 

Image 83
Contents Page Table of contents Troubleshooting Copyright SymbolsAbout this manual Electricity and safety SafetySafety precautions Children may suffocate InstallationChildren may become injured or seriously harmed OperationProduct may fall and become damaged or cause an injury StoragePrecautions when handling the panel CleaningWhat’s Included Device setupInstallation Remote sensor PartsPanel key Remote sensor and spacer logo optionalSpacer logo optional Reverse sideRJ45 Anti-theft lockTo lock an anti-theft locking device Port DescriptionPIM slot Plug In Module Sold separatelyVOL Remote controlTo place batteries in the remote control Ventilation Guided installationInstallation on a perpendicularwall Installation on an indented wallWall mount kit specifications Vesa Wall mount installationPreparing before installing wall mount Installing the wall mountPM55F / PH55F Unit mm RS232C Cable External connectionCheckpoints Cable ConnectionCross LAN cable PC to PC LAN CableDirect LAN cable PC to HUB Connection Viewing control state Get control commandControlling Set control command Control CodesPower control CommandInput source control Volume controlSetting the picture size Set Picture Size Screen mode controlSetting the input source Set Input Source Viewing screen status Get Screen Mode StatusViewing PIP on/off state Get the PIP ON/OFF Status Screen size controlPIP On/Off control Viewing the screen size Get Screen Size StatusVideo Wall Mode Control Auto adjustment control PC and BNC onlyFull Natural Safety LockSetting the video wall Set Video Wall Mode Viewing the safety lock state Get Safety Lock StatusVideo Wall User Control Video Wall OnSet Number Data 0x01 0x02 0x63 100 0x64 10x10 Video Wall Model 1 ~PC connection Connection using a DVI cable Digital typeConnection using a D-SUB cable Analog type  System → General → set Hdmi Hot Plug to Off Connection using an HDMI-DVI cable Sound → set Hdmi Sound to Pcdvi Precautions for using DP Connection using an Hdmi cableConnection using an DP cable ‒‒ Sound → set Hdmi Sound to Avhdmi AV connectionAudio system connection Connection using an Hdmi cable up to 1080pEdit LAN connectionSource selection SourcePC software Multiple Display Control Installation/uninstallationUninstallation Connection Using the RS-232C cableUsing the ethernet cable Connection using a direct LAN cableConnection using a cross LAN cable Home → Player → Viewing contentHome screen PlayerAvailable menu When content is runningFile formats compatible with Player Control buttons on the remoteRestrictions Template files and LFD.lfd filesContents Image Power PointVideo AudioSupported in Network Channel and Local Channel Template filesClone Product URL Launcher SettingSchedule URL LauncherPC Connection Cable ID SettingsDevice ID Device ID Auto SetVideo Wall Video WallNetwork Status On Timer Picture ModeOn/Off Timer  Off / On Off TimerTicker Home → Ticker →Approving a connected device from the server Select Edit  Setup Select Time Zone Setting the current timePicture Screen adjustment2nd 3rd Picture Mode MenuWhen this setting is on, only UHD products are supported Hdmi Black Level Film ModeAuto Adjustment Image ResetPicture Off Reset PictureImmediate display OnScreen display adjustmentTimer OnScreen Display2nd 3rd Description Language Set the menu language Audio receiver. If this occurs, set the product to External Sound adjustmentIf Sound Output is set to External, Auto Volume is disabled SoundNetwork NetworkNetwork Connecting to a Wired Network Network Settings WiredHow to set up manually Automatic Network Settings WiredManual Network Settings Wired How to set up automaticallyAutomatic Network Setup Wireless Network Setting WirelessConnecting to a Wireless Network Select Add Network Manual Network Setup WirelessHow to set up using Wpspbc System SystemMessage to On Power Control Auto Power OnAuto Power Off Power ButtonEco Solution Energy Saving Mode No Signal Power OffUSB Auto Play Lock Security Safety LockChange PIN Button LockLogo Display Time Game ModeReset System Custom LogoSystem menu Troubleshooting forAnynet+Anynet+ HDMI-CEC Anynet+ HDMI-CECProblem Possible Solution Anynet+ device Support SupportDiagnosis TroubleshootingScreen Resolution Before you contact us Not Optimum Mode is displayed Installation issue PC modeScreen issue Adjust Brightness and Contrast Go to Sound and change Sound Output to Internal Sound issueOther issue Remote control issueSource device issue Defined resolution is not supported. appears Question Answer How can I change the frequency? Frequently asked questionsGeneral SpecificationsAppendix Plug-and-Play MAC, 832 x Standard signal mode tableMAC, 640 x VESA, 1152 x VESA, 640 xVESA, 800 x VESA, 1024 xOthers Product damage caused by customer’s faultNot a product defect Prevention of afterimage burn-in What is afterimage burn-in?Optimum picture quality and afterimage burn-in prevention Optimum picture qualityOZ348 2030 UA102 2110 Preventing afterimage burn-inOpen Source Licence Notice License
Related manuals
Manual 85 pages 27.41 Kb Manual 2 pages 16.4 Kb Manual 2 pages 18.27 Kb Manual 106 pages 12.52 Kb Manual 88 pages 23.61 Kb Manual 106 pages 22.27 Kb Manual 106 pages 58.74 Kb Manual 87 pages 10.83 Kb Manual 106 pages 7.27 Kb Manual 2 pages 14.49 Kb Manual 89 pages 12.2 Kb Manual 90 pages 42.67 Kb Manual 90 pages 39.46 Kb Manual 91 pages 40.68 Kb Manual 89 pages 59.02 Kb Manual 90 pages 36.39 Kb Manual 87 pages 7.51 Kb Manual 88 pages 4.1 Kb Manual 87 pages 6.28 Kb Manual 87 pages 12.52 Kb Manual 88 pages 55.71 Kb Manual 88 pages 2.02 Kb Manual 88 pages 27.14 Kb Manual 91 pages 18.79 Kb Manual 88 pages 24.84 Kb Manual 2 pages 16.45 Kb Manual 87 pages 34.06 Kb Manual 84 pages 39.01 Kb

LH49PMFPBGC/CH, LH32PMFPBGC/EN, LH43PHFPMGC/EN, LH55PHFPBGC/CH, LH32PMFPBGC/CH specifications

Samsung's line of professional display solutions, particularly the LH49PHFPBGC/UE, LH43PMFPBGC/EN, LH49PHFPBGC/NG, LH43PMFPBGC/EN, and LH49PMFPBGC/EN models, exemplifies the company's commitment to innovation and quality in digital signage technology. These models are designed to meet the diverse needs of businesses and organizations, providing exceptional visual performance, durability, and versatility.

A standout feature of these displays is their remarkable picture quality, characterized by vibrant colors and sharp images that enhance the viewer's experience. This is achieved through Samsung's advanced LED technology, which ensures high brightness and contrast ratios. Additionally, the displays support 4K resolution, delivering stunning detail that is essential for capturing audience attention in retail environments, corporate settings, or public spaces.

The series also incorporates HDR (High Dynamic Range) capabilities, allowing for a broader range of colors and luminance levels. This feature is particularly beneficial for content that requires precision and depth, enabling businesses to showcase their products or services in the best possible light. Furthermore, with a high refresh rate, these displays minimize lag, ensuring smooth transitions and motion, which is critical in dynamic content presentation.

Durability is a crucial aspect of these professional displays. Designed for 24/7 operation, they can withstand the rigors of continuous use without compromising performance. The robust build is complemented by a sleek, modern design that fits seamlessly into various environments, from retail stores to conference rooms.

Connectivity options are extensive, making it easy to integrate these displays into existing systems. With multiple HDMI and USB ports, users can easily connect various devices, enhancing flexibility in content management and delivery. Built-in Wi-Fi capabilities further facilitate wireless content sharing, enabling users to update and control displays remotely.

The intuitive user interface simplifies content management, allowing for quick and efficient scheduling and playback of media. This is particularly advantageous for businesses that require regular updates to their displays.

In summary, the Samsung LH49PHFPBGC/UE, LH43PMFPBGC/EN, LH49PHFPBGC/NG, LH43PMFPBGC/EN, and LH49PMFPBGC/EN models stand out in the digital signage market due to their breathtaking visuals, robust performance, and user-friendly features. These displays are engineered to deliver exceptional results, making them an excellent choice for any business looking to enhance its communication and engagement strategies. Whether it’s for advertising, information dissemination, or immersive experiences, Samsung’s professional displays are a reliable and high-quality solution.