Samsung SCCC9302FP/SAU, SCC-C9302FP Installing on the ceiling, For SCC-C9302P For SCC-C9302F

Installing the Camera

Installing on the ceiling

1. Carefully read the 'Before Installation' section before starting installation.

E- All holes that are not used for installation must be closed up with the SCREWs provided in your ACCESSORY set as described in the installation HOLE section.

2.Attach the provided TEMPLATE to where you want to install the camera, and then drill a hole (diameter 5 mm,depth min.35 mm).

Completely insert the PLASTIC ANCHOR provided (HUD 5).

3.Connect the power cable and video cable and then arrange the cables so they will not be damaged or jammed while installing the CAMERA.

4.Disassemble the DOME COVER to install the CAMERA.

(For more information on disassembling the DOME COVER and assembly methods, please refer to 'Installing the CAMERA bottom to a PIPE' in section no. 3.)

5.Install the CAMERA.

Match the installation hole on the CAMERA to the hole with the PLASTIC ANCHOR and then assemble the ASSY SCREW-TAPPING (TH M4 X 30)with an O RING on it into all 4 places).

(If there is no O RING,the product will not be properly waterproofed.)

For SCC-C9302P

E

For SCC-C9302F

6.Adjust the LENS to the direction you want and assemble the DOME COVER.

(For more information on adjusting the LENS and assembling the DOME COVER, please refer to 'Installing the CAMERA bottom to a PIPE' in section no. 3.)

20 21