!PRESET
- If you press the PRESET button, a window for PRESET setup pops up.
a If you click the current PRESET number and
a
b
name, the camera will move to its position.
bYou can delete the selected or all the PRESET setup values.
c
cYou can set a new PRESET number and name.
Note
!The PRESET function is supported to all the cameras. You are allowed to set no more than 20 PRESET items.
But, the AD Protocol camera can be set up to 7 PRESET items.
@AUTOPAN : The camera moves between starting and ending points.
#SCAN : The camera moves circulating the preset positions.
$PATTERN : The camera moves following the route that you have defined.
Note
The preset function is supported by all cameras. You can set up to 20 presets. But an active directory (AD) protocol camera can have 7 presets. The names of @, #, and
$may vary depending on the camera vendor. And those functions may not be sup- ported by some product.
-Samsung cameras support those functions.
-In case of Panasonic cameras, the names of AUTOPAN, SCAN, and PATTERN are as following: @ SEQUENCE # AUTOPAN $ SORT.
-In case of PELCO cameras, the names of AUTOPAN, SCAN, and PATTERN are as following: @ FRAME SCAN # AUTO SCAN $ PATTERN.
-The other cameras do not support those functions.